5.9 Liter CR Dodge Cummins 03-07 Discussion of 5.9 Liter Dodge Cummins Diesels with Common Rail Injection

need help

Thread Tools
 
Search this Thread
 
  #1  
Old 07-10-2014, 05:52 PM
cummins2132's Avatar
Diesel Fan
Thread Starter
Join Date: Jul 2014
Posts: 15
Likes: 0
Received 0 Likes on 0 Posts
Default need help

I have a problem idk what to do first the dash warning lights wont come off when key is out off ignition along with the overhead dash that displays how much fuel u have till e has nothing but --. I cant hear the lift pump go off when I turn the key I also seem to have no power to engine because the boost fooler wont light up or anything cranks but no start. it all started from when someone was trying to wire electric fans and got the truck to run but wouldn't shut off when key was off so what he did was pull the battery cables off one at a time so plz help what could it be
 
  #2  
Old 07-11-2014, 08:56 AM
dangerous1965's Avatar
Diesel Bomber
Join Date: Dec 2008
Location: Escondido CA
Posts: 1,713
Received 111 Likes on 105 Posts
Default

Fried PCM worst case. Dirty terminals probably. Disconnect the fans and see what happens.
 
  #3  
Old 07-12-2014, 09:47 AM
cummins2132's Avatar
Diesel Fan
Thread Starter
Join Date: Jul 2014
Posts: 15
Likes: 0
Received 0 Likes on 0 Posts
Default

I was thinking that now bc everything is clean and good fans are disconnected Ill wire them after I figure out how to get power to the engine ig from the ecu
 
  #4  
Old 07-12-2014, 09:56 AM
dangerous1965's Avatar
Diesel Bomber
Join Date: Dec 2008
Location: Escondido CA
Posts: 1,713
Received 111 Likes on 105 Posts
Default

Dealer can hook up and tell you whats up! Where did they hook up to power the fans?
 
  #5  
Old 07-12-2014, 10:51 AM
cummins2132's Avatar
Diesel Fan
Thread Starter
Join Date: Jul 2014
Posts: 15
Likes: 0
Received 0 Likes on 0 Posts
Default

dealer wont do it they cant get power to the engine to pull codes the dash lights stay on and on the cp3 controller it keeps blowing fuses
 
  #6  
Old 07-12-2014, 10:09 PM
dangerous1965's Avatar
Diesel Bomber
Join Date: Dec 2008
Location: Escondido CA
Posts: 1,713
Received 111 Likes on 105 Posts
Default

You have a short to ground somewhere possibly the controller unhook it. I assume you have dual CP3's Damn this keeps getting worse! Something melted when the fans were hooked up find out where they were hooked up for power! Back trace wires if it goes into the PCM your screwed!
 
  #7  
Old 07-13-2014, 12:04 PM
cummins2132's Avatar
Diesel Fan
Thread Starter
Join Date: Jul 2014
Posts: 15
Likes: 0
Received 0 Likes on 0 Posts
Default

im fixing to and ya I have dual and ur telling me its a headache im ready to drive this thing off a cliff and which wires controller wires and wires to fan were hooked to overhead console then switched to radio fuse hooked to circuit breaker to positive terminal that's what a buddy told me
 




All times are GMT -5. The time now is 12:16 AM.