5.9 Liter CR Dodge Cummins 03-07 Discussion of 5.9 Liter Dodge Cummins Diesels with Common Rail Injection

2004.5 died now wont start no codes

Thread Tools
 
Search this Thread
 
  #1  
Old 11-12-2013, 06:17 PM
jeremypreslar's Avatar
Newbie
Thread Starter
Join Date: Nov 2010
Location: marble falls tx
Posts: 8
Received 0 Likes on 0 Posts
Default 2004.5 died now wont start no codes

yesterday i started my truck pulled forward about 20 feet then my truck died and wont start back up the only code i am getting is a p1757 im assuming that being a solenoid in the tranny has nothing to do with this not starting problem i have cleaned all the battery connections and am going to make sure the batteries are fully charged tomorrow it seems like its not getting fuel but i just changed the fuel filter and i would think the fuel pump would throw a code if it were bad any suggestions are appreciated
 
  #2  
Old 11-12-2013, 06:48 PM
kcmotorz's Avatar
Diesel Fan
Join Date: Nov 2013
Location: Kansas City
Posts: 11
Likes: 0
Received 0 Likes on 0 Posts
Default

I am having relatively the same issue, Could be your lift pump or injection pump. Also most mechanical failures don't set the accurate codes if any on these cummins set ups.
 
  #3  
Old 11-12-2013, 10:41 PM
jeremypreslar's Avatar
Newbie
Thread Starter
Join Date: Nov 2010
Location: marble falls tx
Posts: 8
Received 0 Likes on 0 Posts
Default

i was thinking fuel pump but im not sure wasnt any signs of it going, no loss of performance or stuttering.Im not sure about this pump on my old gasser when the pump went i was able to bump the tank and get it going again as a temporary fix, the night before it happened i did accidentally leave the key on for a few hours maybe the subs sucked the batteries down? I hope its not the pump but at this point im starting to think it is
 
  #4  
Old 11-13-2013, 12:11 PM
kcmotorz's Avatar
Diesel Fan
Join Date: Nov 2013
Location: Kansas City
Posts: 11
Likes: 0
Received 0 Likes on 0 Posts
Default

A quick way to tell is put a pan under the drain hose for the filter resevoir, open the drain and remove the fuel filter. Leave it open and and turn the key on, if the housing fills with diesel your lift pump is good, if it doesn't I'd start there.
 
  #5  
Old 11-13-2013, 09:52 PM
jeremypreslar's Avatar
Newbie
Thread Starter
Join Date: Nov 2010
Location: marble falls tx
Posts: 8
Received 0 Likes on 0 Posts
Default

any ideas of a fuel pump relay location?

---AutoMerged DoublePost---

fixed cleaned battery terminals till they shined replaced fuel filter put on a charger for a few hours and started right up
 

Last edited by jeremypreslar; 11-13-2013 at 09:52 PM. Reason: Automerged Doublepost
  #6  
Old 11-30-2013, 08:54 AM
coxey2's Avatar
Newbie
Join Date: Dec 2010
Posts: 4
Likes: 0
Received 0 Likes on 0 Posts
Default fixed yet?

Mine died and won't start now. Same symptoms as yours. Figured it out yet? thanks
 
  #7  
Old 11-30-2013, 10:51 AM
kcmotorz's Avatar
Diesel Fan
Join Date: Nov 2013
Location: Kansas City
Posts: 11
Likes: 0
Received 0 Likes on 0 Posts
Default

no not yet, put a new lift pump in same issue, gonna try testing injectors next.
 
  #8  
Old 12-02-2013, 07:19 PM
keepitreal's Avatar
Diesel Fan
Join Date: Jan 2012
Location: Colorado
Posts: 76
Received 2 Likes on 2 Posts
Default

before you test the injectors make sure the crossover tubes are to the correct torque spec of 37ftlb. I think sounds about right. that solved my problem after months of fighting a no start issue on an 03.
 
  #9  
Old 12-02-2013, 08:08 PM
1999stroker's Avatar
Diesel Bomber
Join Date: Jun 2011
Location: Squaller holler, ohi
Posts: 3,368
Received 143 Likes on 125 Posts
Default

41lbs

Sent from my DROID BIONIC using Tapatalk
 
Related Topics
Thread
Thread Starter
Forum
Replies
Last Post
moose2j
Chevy/GMC 6.2L and 6.5L
8
06-21-2015 12:36 AM
ronstop
5.9 Liter CR Dodge Cummins 03-07
0
02-26-2015 09:48 AM
RayRay4991
12 Valve 2nd Gen Dodge Cummins 94-98
4
02-23-2015 07:45 AM
southernbelle14
6.0L Performance
0
12-29-2014 10:53 AM
Tyler_302
Ford Powerstroke 03-07 6.0L
6
10-22-2014 07:08 PM



Quick Reply: 2004.5 died now wont start no codes



All times are GMT -5. The time now is 07:32 AM.