2001 dodge 5 to 6 speed!!
#1
#6
#7
#8
as previously mentioned, the tcase should be fine. However, the driveshafts will possibly pose problems. I've had 5 speeds with 241LD tcase that the output shaft for rear DS was too small for the driveshaft.
---AutoMerged DoublePost---
As for clutches, you can get the 12" clutch with the big input shaft splining, and retain your stock flywheel, but I wouldn't recommend it. Go with the 13" one for the 6speed. Don't forget that the starter may require a spacer, as well.
---AutoMerged DoublePost---
As for clutches, you can get the 12" clutch with the big input shaft splining, and retain your stock flywheel, but I wouldn't recommend it. Go with the 13" one for the 6speed. Don't forget that the starter may require a spacer, as well.
Last edited by Rogan; 05-24-2012 at 09:41 AM. Reason: Automerged Doublepost
Thread
Thread Starter
Forum
Replies
Last Post
wolfriver
24 Valve 2nd Gen Dodge Cummins 98.5-02
1
02-19-2015 07:18 AM
nelly559
24 Valve 2nd Gen Dodge Cummins 98.5-02
5
02-02-2015 08:19 AM