24 Valve 2nd Gen Dodge Cummins 98.5-02 Discussion of 24 Valve 5.9 Liter Dodge Cummins Diesels with VP44 Injection Pumps
Sponsored by Trailer Plus

EGT's ?

Thread Tools
 
Search this Thread
 
  #1  
Old 02-05-2012, 03:48 AM
01ISX's Avatar
Diesel Fan
Thread Starter
Join Date: Jan 2010
Location: Ky
Posts: 71
Received 0 Likes on 0 Posts
Default EGT's ?

What is a normal EGT reading with a silver 64/74/14 with 200 hp injectors ? around 35 mph and then easin into at 15psi im starting to see 1,000 degrees cruisen down highway 65mph at 1 pound of boost like high 700's soon as turbo starts to make boost the egt spikes up to 1200 plus and what may cause this a Bad injector ? when i first put the turbo on never seem to spike that high its been sitting for 3 weeks why i been out on the Road cause i drive a truck for a livign i get back thursday night drive friday afternoon take it out and it seems not be right to me with egts getting that hot that quick..

---AutoMerged DoublePost---

?????????
 

Last edited by 01ISX; 02-05-2012 at 03:48 AM. Reason: Automerged Doublepost
  #2  
Old 02-05-2012, 06:57 AM
sthrnrider's Avatar
Diesel Enthusiast
Join Date: Jul 2009
Location: Mississippi
Posts: 185
Likes: 0
Received 14 Likes on 14 Posts
Default

Sounds normal to me. What are your EGTs when the turbo lights up. I know with my 62 when it lights up my EGTs go down but I'm running stick injectors. 1200 ain't that bad its getting in the 1500 or more range and staying there is what hurts the turbo. Look over your boots make sure you don't have a leak. But IMO everything sounds normal.


---
I am here:
 
  #3  
Old 02-05-2012, 12:56 PM
01ISX's Avatar
Diesel Fan
Thread Starter
Join Date: Jan 2010
Location: Ky
Posts: 71
Received 0 Likes on 0 Posts
Default

HEY well thanks Sthrnrider for the reply back..... when i light up and its gets up around 1300 plus... i did find a problem last night turbin house on the front is leakin i seen black soot all on the back of my compressor housing but the hold down tabs and the bolts where all tight ... i know notice i cant get over 40 psi i can only hit 39 and 40 and waste gate isn't hooked up
 
  #4  
Old 02-06-2012, 10:22 PM
sthrnrider's Avatar
Diesel Enthusiast
Join Date: Jul 2009
Location: Mississippi
Posts: 185
Likes: 0
Received 14 Likes on 14 Posts
Default

To me the EGTs sound normal for your set up. I would buy a rebuild kit for the turbo get it all sealed up good. Keep in mind if your running stock intercooler boots with that turbo you might bust one. It happened to me I put on BD boots. Your only hitting 40 psi? With your set up you should be pushing 50 if you have head studs. Mine is setup for 43 psi haven't hit it yet but when I but new injectors it will be no problem. With stock injectors I can hit 38 psi with my current setup. The weather can affect your boost as well on cold days it will build more boost than normal on hot days no as much.


---
I am here:
 
  #5  
Old 02-07-2012, 09:13 AM
MillerBoyzDiesel's Avatar
Diesel Wrench
Join Date: Dec 2011
Location: Kentucky
Posts: 763
Received 39 Likes on 37 Posts
Default

If your needle hits the p on pyrometer its time to let off! haha
 
Related Topics
Thread
Thread Starter
Forum
Replies
Last Post
Notdaddysmoney
5.9 Liter CR Dodge Cummins 03-07
11
10-23-2015 12:52 AM
CumminsCoalRoller24/7
5.9 Liter CR Dodge Cummins 03-07
6
05-25-2015 09:04 PM
Moparts345
5.9 Liter CR Dodge Cummins 03-07
7
05-24-2015 09:35 AM
Curry
Ford Powerstroke 03-07 6.0L
3
04-20-2015 04:04 AM
TheDirtyDozen
12 Valve 2nd Gen Dodge Cummins 94-98
7
11-16-2014 02:56 PM



Quick Reply: EGT's ?



All times are GMT -5. The time now is 04:50 AM.