24 Valve 2nd Gen Dodge Cummins 98.5-02 Discussion of 24 Valve 5.9 Liter Dodge Cummins Diesels with VP44 Injection Pumps
Sponsored by Trailer Plus

Turbo Problem?

Old Jan 21, 2012 | 02:43 AM
  #1  
Maui J's Avatar
Thread Starter
|
Newbie
Joined: Jan 2012
Posts: 4
Likes: 0
Default Turbo Problem?

I just bought a 98 dodge 24 valve diesel. I love it but have one concern. It seems only to be when its cold, I'll lay into it and it bogs, with lack of power. At first I thought it was the trany, and then I thought it was a fuel issue which it still may be, dout it but I noticed the turbo not running, I couldnt here it whistlin. The guy I bought it from went through a couple turbos and then this ones Brand New. Im sure because of what Im experiencing, But It seems like after a couple of miles of warm up it goes away. Pretty sure the turbos fine. Seems minor, Help Me Out!!!!!! Please Thanks
 
Reply
Old Jan 21, 2012 | 08:19 AM
  #2  
diesel life's Avatar
Diesel Enthusiast
Joined: Nov 2011
Posts: 242
Likes: 7
From: Indiana
Default

Is your truck bone stock or does it have some mods???? If sonwhat are they. Do you have a fuel pressure guage????
 
Reply
Old Jan 21, 2012 | 11:39 AM
  #3  
Maui J's Avatar
Thread Starter
|
Newbie
Joined: Jan 2012
Posts: 4
Likes: 0
Default Stock

I'm fairly certain it is all stock. It would slowly and slugishly excelerate, but once it hits about 2300 RPM the turbo kicks in and takes off like there was never a problem

---AutoMerged DoublePost---

just replied, when you get a chance. Thanks
 

Last edited by Maui J; Jan 21, 2012 at 11:39 AM. Reason: Automerged Doublepost
Reply
Old Jan 21, 2012 | 03:49 PM
  #4  
luke46's Avatar
Diesel Enthusiast
Joined: Jul 2009
Posts: 379
Likes: 5
From: NM
Default

Probably not the same issue Mine kinda did this a while back turned out it was the map sensor giving a low boost signal but I had a code. It would throw me into kind of a "limp" mode till it saw more boost than it would spool up and take off. It was weird. Is your check engine light on or burnt out? Wait where are you from? Mine was a 98 24v that I sold to someone else.
 
Reply
Old Jan 21, 2012 | 05:52 PM
  #5  
Maui J's Avatar
Thread Starter
|
Newbie
Joined: Jan 2012
Posts: 4
Likes: 0
Default No real Turbo Spool

Originally Posted by luke46
Probably not the same issue Mine kinda did this a while back turned out it was the map sensor giving a low boost signal but I had a code. It would throw me into kind of a "limp" mode till it saw more boost than it would spool up and take off. It was weird. Is your check engine light on or burnt out? Wait where are you from? Mine was a 98 24v that I sold to someone else.
We just took it out and ofcourse when its cold only, it wouldn't spool. We are curious if it is a safety for the turbo so that it doesn't damage the turbo. or force cold air into the motor. I bought it in West Sacramento. Its super clean.
 
Reply
Related Topics
Thread
Thread Starter
Forum
Replies
Last Post
burndiesel
24 Valve 2nd Gen Dodge Cummins 98.5-02
10
Feb 7, 2023 01:15 AM
avatardvr
Ford Powerstroke 03-07 6.0L
18
Aug 8, 2019 12:38 AM
Hogridenfool
6.7 Liter Dodge Cummins 07.5-12
3
Nov 20, 2017 04:37 PM
n2brk
6.7 Liter Dodge Cummins 07.5-12
4
Feb 21, 2015 09:05 AM
GreenDieselF
24 Valve 2nd Gen Dodge Cummins 98.5-02
2
Oct 20, 2014 02:05 PM


Thread Tools
Search this Thread

All times are GMT -5. The time now is 03:59 AM.