diesel kleen or 2 sroke oil?
#12
I use DK every time I fill up. I've heard both good and bad about it. From personal use I can say that she starts a lot better and runs/get's up and goes better. I ran a tank dry and decided to run the truck without it once and noticed an immediate difference in how she ran. So I haven't stopped using it every fill up.
I've heard of adding 2 stroke also but I've never tried it in my rig.
Just my .02 worth...
I've heard of adding 2 stroke also but I've never tried it in my rig.
Just my .02 worth...
#13
#14
#17
Thanks for that important information, I was wondering what ATF was for, I was wondering what Alcohol, Tobacco and Firearms had to do with making the VP44 run longer. And now following your wise advice I only need 2 stroke in just my chain saw, not any of the other 2 stroke motors I might have. Thanks again for all you vast knowledge regarding all things in fuel additives.
We're all here to help each other. The simple fact is, 2 stroke oil does nothing that Diesel Service doesn't.
It is made for our trucks to combat cold weather and the ill effects of ULSD.
#18
1oz per gallon.
#19
B R D post says it all 2% soypowder biodiesel is the way to go.next would be Opti-Lube summer blend then Outboard. I also use Howes Diesel Treat at every fill up I also use the Outboard at 1/2 Oz per gal all year. I was using a Oz per gal before.
Last edited by AABEAR; 12-04-2011 at 11:18 PM.