2000 Cummins up and died?
Its sure crazy how each make is so much different! I just got through fixing a 99 stroke, that high pressure oil system is so much different. One guy looked at it and said it needed a new hpop and was gonna cost 3 grand! I finally traced it down to a no fuel issue. Did not take any new parts either.
Thread Starter
|
Diesel Enthusiast
Joined: Feb 2011
Posts: 169
Likes: 4
From: Idaho
I know im sorry
But i have a 95 stroker too so i cant talk ***** any more...
---AutoMerged DoublePost---
Well i looked at the rig today, my buddy hopped in and cranked it over it sputtered a couple of times, puffed out some blue smoke and fired up and ran just fine. He said it got low on fuel the same day it died but he claims he has ran it lower. Anyways they put some fuel in and it still wouldnt fire the day before. My scan tool gave me 2 codes, P1689 and 1698, the 1689 said no communitcation between ECM and injection pump, 1698 said somethin about no bus transmission. Then i did the key test, I got P1694, 1693, 1687. So there ya go! Thanks in advance.
But i have a 95 stroker too so i cant talk ***** any more...---AutoMerged DoublePost---
Well i looked at the rig today, my buddy hopped in and cranked it over it sputtered a couple of times, puffed out some blue smoke and fired up and ran just fine. He said it got low on fuel the same day it died but he claims he has ran it lower. Anyways they put some fuel in and it still wouldnt fire the day before. My scan tool gave me 2 codes, P1689 and 1698, the 1689 said no communitcation between ECM and injection pump, 1698 said somethin about no bus transmission. Then i did the key test, I got P1694, 1693, 1687. So there ya go! Thanks in advance.
Last edited by justanother92; Sep 27, 2011 at 07:21 PM. Reason: Automerged Doublepost
Tell him don't be in denial, the vp is beginning its end.
