A/C stuck in defrost
Yeh, on your first pic, pull the hose off the brass block and check for vac. (with eng. running) there, or just under your check valve in pic #2 middle arrow. It needs to be more than just pulsing your finger tip. It should stick you finger to it. I just ran out and tried mine and it pulls tight to my finger. Another option for electric pump is a ford super duty vac pump from autowreckers . pt
Mine done that too. i just unhooked it from the vac thing that opens and closes the lever to switch it from defrost to dash and zip tied the lever in the down position for a temp fix till i have time to troubleshoot it so it would blow out the dash
I just had the same problem there is a vac t-line that came up done up on the fire wall where all the wire bundles are. basically centered with steering wheel I accidently pulled it loose wiring my air dog same problem just defrost and no cruise control I will take a pic and post tomorrow .
well Im going to get out there today in a few hours after this
RAIN
blows through so it wont be so hot! And check all the hoses I can
---AutoMerged DoublePost---
So turnes out the line from the T to cruise control was cut... also the main line broke then I touched it....any idea where I can get new lines?
RAIN
blows through so it wont be so hot! And check all the hoses I can---AutoMerged DoublePost---
So turnes out the line from the T to cruise control was cut... also the main line broke then I touched it....any idea where I can get new lines?
Last edited by BACONBITSFORU; Jul 25, 2011 at 08:14 PM. Reason: Automerged Doublepost
well Im going to get out there today in a few hours after this
RAIN
blows through so it wont be so hot! And check all the hoses I can
---AutoMerged DoublePost---
So turnes out the line from the T to cruise control was cut... also the main line broke then I touched it....any idea where I can get new lines?
RAIN
blows through so it wont be so hot! And check all the hoses I can---AutoMerged DoublePost---
So turnes out the line from the T to cruise control was cut... also the main line broke then I touched it....any idea where I can get new lines?



