fuel press
#1
fuel press
ok I got a new glowshift 0-100 psi fuel press gauge put on my truck after it sitting on the tool box since last fall get it hooked up and it reads 4 psi so I have a autometer gauge new 0-15 psi that is mech and rig it in to the same fitting and it reads 9 1/2 psi so I streched the spring out on the return port on the fass 95 and no help still doing 9 1/2 psi any thoughts?
#2
#3
yes they are at an idle can't drive wot with the hood open
but I'll try and fill out my sig but the truck come with a 4" exaust witha aero 4040 and a aem intake and had 162000kms and now I borrowed a edge ez and when we did the fass we took out the stock filter and went from fass to vp with rubber fuel line hope this helps
but I'll try and fill out my sig but the truck come with a 4" exaust witha aero 4040 and a aem intake and had 162000kms and now I borrowed a edge ez and when we did the fass we took out the stock filter and went from fass to vp with rubber fuel line hope this helps
#7
#8
Thread
Thread Starter
Forum
Replies
Last Post
Cavnar
Diesel In Distress - Support Ticket
3
09-09-2015 07:18 PM
Jet A Fuel
Tech Article Submission
0
06-05-2015 03:28 PM