24 Valve 2nd Gen Dodge Cummins 98.5-02 Discussion of 24 Valve 5.9 Liter Dodge Cummins Diesels with VP44 Injection Pumps
Sponsored by Trailer Plus

Truck wont start

Thread Tools
 
Search this Thread
 
  #1  
Old 10-06-2010, 08:16 AM
Jeff M's Avatar
Diesel Fan
Thread Starter
Join Date: Mar 2008
Location: San Diego, CA
Posts: 89
Likes: 0
Received 1 Like on 1 Post
Default Truck wont start

I just got back from deployment yesterday and my dodge wont start. My wife had been starting it one a week all of my deployment. She stopped however and the truck sat for about 2 months. Well, the batteries died. I try to jump it off and the truck turns over but doesnt fire.

I'm thinking that the batteries are so dead that they dont have enough juice to run the lift pump. I just dont understand how the truck turns over but the lift pump wont work. ANy advice is welcome!

Thanks!
 
  #2  
Old 10-06-2010, 08:44 AM
Turbolvr's Avatar
Diesel Enthusiast
Join Date: Oct 2010
Posts: 151
Received 11 Likes on 8 Posts
Default

lift pump runs via a signal from the ECM (most ECMs wont work w/less than 8 volts), the starter is hard wired. try turning the key to "on" then just bump the starter (dont crank) and listen for the pump it should run for several seconds. the truck may also have an air leak in the fuel system and will need to crank a while to fire. Also the grid heaters will need a LOT of juice to run, and they will try to cycle as soon as the key is on.
Get a good charge in the batteries before going crazy trying to start it.
 
Related Topics
Thread
Thread Starter
Forum
Replies
Last Post
doublehbar
24 Valve 2nd Gen Dodge Cummins 98.5-02
13
08-09-2015 12:35 AM
doublehbar
24 Valve 2nd Gen Dodge Cummins 98.5-02
33
06-05-2015 11:38 AM
dfish001
5.9 Liter CR Dodge Cummins 03-07
7
03-30-2015 03:07 PM
mountainmover
Big Rigs & Semis
0
03-01-2015 06:03 AM
ronstop
5.9 Liter CR Dodge Cummins 03-07
0
02-26-2015 09:48 AM



Quick Reply: Truck wont start



All times are GMT -5. The time now is 01:08 AM.