no wait to start light?
#1
#2
It could be the bulb in the dash. My high beam bulb burnt out one day. I was able to swap the Wait to start and high beam bulbs to check and see if it was a bulb. Sure enough it was. A new bulb and all was operating properly again. Easy to access as we'll. Pull the dash front cover off, and 4 screws hold the dash board in place. Trucks with autos have a gear selection linkage that rums down to the steering colom that HAS to be removed first. Hope this helps, and the fix is a cheap bulb!
Thread
Thread Starter
Forum
Replies
Last Post
bullrideris1
24 Valve 2nd Gen Dodge Cummins 98.5-02
0
01-23-2015 09:22 AM