Mt overhead console flashed CCD this morning wondering if anyone knows y?

 

Chrysler Collision Detection (CCD)If your getting the CCD error the console is not getting a signal it needs.. You have a security system?Check for codes to.

 

checked no codes.... no security system that i know of

 

I had the same problem, found a connector undone under the dash. It is near the large connector behind and to the left of the brake/clutch pedal. If there is a break anywhere with those 2 wire you will get ccd. If there are no other codes or symptoms, I'm betting there is a problem in one of those 2 wires.

---AutoMerged DoublePost---

The wires are a Purple with brown stripe, and White with Black stripe. They should be twisted to one another. They will also be at you PCM, ECM, and ABS module. I did a continuity test between my PCM and the wires at the overhead console to diagnose the opens in the wires. I'll try and get a schematic up for you.

 

Mine did this when a cab clearance light had leaked and the overhead filled with water. I fixed the leak and never had it happen again.