24 Valve 2nd Gen Dodge Cummins 98.5-02 Discussion of 24 Valve 5.9 Liter Dodge Cummins Diesels with VP44 Injection Pumps
Sponsored by Trailer Plus

Vp44 Question?

Old May 22, 2010 | 11:36 AM
  #1  
98dodgecummins's Avatar
Thread Starter
|
Diesel Wrench
Joined: Oct 2009
Posts: 510
Likes: 8
Default Vp44 Question?

Is the vp44 pump just not made for chips or if you get a good lift pump that keeps 17 psi at all times. Can a vp44 last forever if you have a good lift pump or is the vp44 just cant handle a tapped pump for very long?
 
Reply
Old May 22, 2010 | 01:13 PM
  #2  
crzycummins's Avatar
Diesel Bomber
Joined: Mar 2010
Posts: 1,186
Likes: 87
From: forsyth il
Default

a vp will last plenty long if you supply it with the fuel it needs. if you dont on the other hand give it the fuel required for your setup then you will be replacing it more than any of us would like. looks like your doing ok if your psi is around ten at wot but once you get below that its probably time to upgrade to keep psi up. as is said all the time make sure you have a fuel pressure gauge if you dont already.
 
Reply
Old May 22, 2010 | 01:27 PM
  #3  
FRIDAY88's Avatar
Diesel Enthusiast
Joined: May 2010
Posts: 298
Likes: 7
From: BATTLE MOUNTAIN
Default

Well lets just put it this way Big chip Stock lift pump bey bey VP44 Big Chip and Over 17psi supplie Bey Bey VP44 if i were you just go with an Airdog or FASS fuel system and make sure its not over or under around 17psi and you will be fine ..
 
Reply
Old May 22, 2010 | 01:33 PM
  #4  
Dr. Evil's Avatar
BOMBARDIER
Joined: Mar 2007
Posts: 23,293
Likes: 1,322
From: North of You
Default

Originally Posted by FRIDAY88
Well lets just put it this way Big chip Stock lift pump bey bey VP44 Big Chip and Over 17psi supplie Bey Bey VP44 if i were you just go with an Airdog or FASS fuel system and make sure its not over or under around 17psi and you will be fine ..
Not true.
 
Reply
Old May 22, 2010 | 02:44 PM
  #5  
Diesel Dawgs Performance's Avatar
Joined: Mar 2007
Posts: 14,546
Likes: 843
From: Western NC
Default

Ive seen stock pumps untapped last 150K+ Miles. Mine has 130K Tapped miles and its running fine. Some last and some do not. 9 times out of 10 if you give your VP44 a good supply of fuel it will last 100K+ miles.
 
Reply
Old May 22, 2010 | 03:43 PM
  #6  
98dodgecummins's Avatar
Thread Starter
|
Diesel Wrench
Joined: Oct 2009
Posts: 510
Likes: 8
Default

well the bad thing about my fass ddrp is that it pushes 20 psi at idle and whenever it gets up to that psi my truck starts having a slight miss to it? what could this be?
 
Reply
Old May 22, 2010 | 04:22 PM
  #7  
FRIDAY88's Avatar
Diesel Enthusiast
Joined: May 2010
Posts: 298
Likes: 7
From: BATTLE MOUNTAIN
Default

If your not carefull you will end up blowing out the diaphram in it running that much pressure idont own a cummins but ive seen these pumps take a Sh*t from running tooo much fuel supplie pressure I get all this Info on the VP44 and CP3s From My good Friend Dan Stays in good touch with 2009 Diesel power champ Robert Evans who lived no more than 60 miles away from me in Cresent Valley Nevada With His 04 cummins twin CP3 pumps this guy nows his stuff
 
Reply
Old May 23, 2010 | 07:49 PM
  #8  
crzycummins's Avatar
Diesel Bomber
Joined: Mar 2010
Posts: 1,186
Likes: 87
From: forsyth il
Default

Originally Posted by lukesdiesel
Ive seen stock pumps untapped last 150K+ Miles. Mine has 130K Tapped miles and its running fine. Some last and some do not. 9 times out of 10 if you give your VP44 a good supply of fuel it will last 100K+ miles.
mine lasted about 140,000 and probably still had some left but i decided to upgrade....i agree here. if you give it a good supply then it should last you for a hefty length of time...
 
Reply
Old May 23, 2010 | 07:57 PM
  #9  
FRIDAY88's Avatar
Diesel Enthusiast
Joined: May 2010
Posts: 298
Likes: 7
From: BATTLE MOUNTAIN
Default

you get a good supply pump and no worries about it
 
Reply
Old May 31, 2011 | 12:17 PM
  #10  
daddyka's Avatar
Newbie
Joined: May 2011
Posts: 1
Likes: 0
Default

i have a question about a vp44 pump.i replaced the transistor and it still burning one of the wire.please help me!!!!.any response is welcome
 
Reply

Thread Tools
Search this Thread

All times are GMT -5. The time now is 12:28 AM.