need help badly
#1
need help badly
im working on a 99 it had pump codes in the ecm so i put a new pump on and it has no codes at all now but it has the same problem still if you try to gas it hard it falls flat on its face has new lift pump on it, it will rev up no load to 3000rpm no problom but under a load it goes to about 1500rpm easy after that it it fall flat I check the turbo its good its like its not telling the pump to turn up the wick it will rev up but it slow to act even in 2nd gear.im lost to what it could be, any help is great help
#2
have you unpluged the programer yet and tryed, after that id say turbo, boost boot, inercooler problem. try those but this could be related to the poping in the idal so my be injectors??
---AutoMerged DoublePost---
sorry you have the same pic as another guy on here disregard the idle problem
---AutoMerged DoublePost---
sorry you have the same pic as another guy on here disregard the idle problem
Last edited by ja-mudder; 11-25-2009 at 11:09 PM. Reason: Automerged Doublepost
#3
#4
#5
The following users liked this post:
jwbigbaddodge (11-26-2009)
#7
ya did it doesnt have any codes now
---AutoMerged DoublePost---
its got a new overflow bypass to im at a losse im going to look at the aaps today, iv never seen this problom before
---AutoMerged DoublePost---
I THINK IT HAD TWO PROBLOMS at the same time pump being one of them and the other? idont now i thankyou all for the help im going to go look at the apps
---AutoMerged DoublePost---
its got a new overflow bypass to im at a losse im going to look at the aaps today, iv never seen this problom before
---AutoMerged DoublePost---
I THINK IT HAD TWO PROBLOMS at the same time pump being one of them and the other? idont now i thankyou all for the help im going to go look at the apps
Last edited by jwbigbaddodge; 11-26-2009 at 10:01 AM. Reason: Automerged Doublepost
#8