24 Valve 2nd Gen Dodge Cummins 98.5-02 Discussion of 24 Valve 5.9 Liter Dodge Cummins Diesels with VP44 Injection Pumps
Sponsored by Trailer Plus

&@*& door panels!!!

Old Nov 22, 2008 | 01:52 AM
  #1  
johnboy's Avatar
Thread Starter
|
Diesel Fan
Joined: Oct 2008
Posts: 71
Likes: 2
From: monroe, wa
Default &@*& door panels!!!

what is the secret to getting the door panels off? i damn near ripped it off just tyring to get to the speaker.

also, my left rear door doesn't seem to want to release the lower latch. can i pull the door panel while its closed to open the door?
 
Reply
Old Nov 22, 2008 | 08:26 AM
  #2  
Mopar1973Man's Avatar
Diesel Wrench
Joined: Mar 2007
Posts: 820
Likes: 132
From: New Meadows, Idaho
Default

There is a forked tool like a claw hammer that slide up under the panel and allow you to pry the plastic fasteners out of the door without breaking the door panel. It might break the plastic fasteners or rip them out of the door panel. So make sure you get a bag of them from NAPA or such...

Stop by NAPA or a body shop and they be able to get you one (or at least show you what it looks like) I've made my own out of a piece of steel.
 
Reply
Old Nov 22, 2008 | 09:25 AM
  #3  
DB Admin's Avatar
Banned
Joined: Mar 2007
Posts: 29,849
Likes: 3,297
From: Perry Co. Ohio
Default

Get your fingers under there and pull out , the clips will stay in the door , slide them out and put them back in the door skin when you put it back on .

 
Reply
Old Nov 22, 2008 | 09:30 PM
  #4  
dukeboy_318's Avatar
Diesel Bomber
Joined: May 2008
Posts: 1,306
Likes: 119
From: columbus, In, home o
Default

i just use a flat screw driver to start one corner and then my fingers the rest of the way.
 
Reply
Old Nov 22, 2008 | 11:17 PM
  #5  
94cummins12v's Avatar
Diesel Bomber
Joined: Jan 2008
Posts: 4,525
Likes: 103
From: Havre mt
Default

i just pulled the panels off my 94 by hand broke every one of those stupid black clip things but i got more at napa the next day
 
Reply
Old Nov 22, 2008 | 11:20 PM
  #6  
Nitelord's Avatar
Diesel Bomber
Joined: Jul 2007
Posts: 4,980
Likes: 223
From: Pottstown, PA
Default

Originally Posted by dukeboy_318
i just use a flat screw driver to start one corner and then my fingers the rest of the way.
Same here. Once you get the corner started, it's pretty straight forward. I broke two of the clips, but got a bag of them at NAPA.
 
Reply
Old Nov 23, 2008 | 03:31 PM
  #7  
Mr.Krabs's Avatar
Diesel Wrench
Joined: Mar 2008
Posts: 808
Likes: 26
From: Lewiston Idaho
Default

A superbar works good too.
 
Reply
Old Nov 24, 2008 | 11:08 PM
  #8  
johnboy's Avatar
Thread Starter
|
Diesel Fan
Joined: Oct 2008
Posts: 71
Likes: 2
From: monroe, wa
Default

ill try that. i thought i was gonna mess up the panel when i was pulling on it. i need to replace the speaker because it comes on and off. its getting really annoying.
 
Reply
Old Nov 24, 2008 | 11:45 PM
  #9  
Dr. Evil's Avatar
BOMBARDIER
Joined: Mar 2007
Posts: 23,293
Likes: 1,322
From: North of You
Default

How about one of these??:

Detail Page for 35400 Door Upholstery Remover - Lisle Corporation
 
Reply
Old Nov 25, 2008 | 12:57 AM
  #10  
johnboy's Avatar
Thread Starter
|
Diesel Fan
Joined: Oct 2008
Posts: 71
Likes: 2
From: monroe, wa
Default

 
Reply


Thread Tools
Search this Thread

All times are GMT -5. The time now is 11:45 AM.