Stopping in to say hi and update
#1
Stopping in to say hi and update
Took the truck into a transmission shop and had them hook it up to their diagnostic machine. They came back with a governor pressure solenoid and a governor pressure sensor. Quoted me about $750 out the door. Needless to say I went and picked up the truck. Ordered up the parts(just over $100) and had them swapped out in a couple hours time. Been working great since then.
Over the last few weeks the truck sprung a fuel leak. Took a minute to find it but I finally tracked it down to the fuel heater wires on top of the filter housing. Fixed that today and all appears good. Now on to some of the stuff I want to upgrade on the truck.
Hope everyone had a Merry Christmas and Happy New Year!
Over the last few weeks the truck sprung a fuel leak. Took a minute to find it but I finally tracked it down to the fuel heater wires on top of the filter housing. Fixed that today and all appears good. Now on to some of the stuff I want to upgrade on the truck.
Hope everyone had a Merry Christmas and Happy New Year!
#2
#3
#4
#6
#8
That's the usual Trio that everyone uses to monitor the most important things on the engine.
It is also a good tool to use when your having engine problems like boost dropping off or exhaust temps getting high.
These are very important if your dragging a trailer and working the engine hard.
It is also a good tool to use when your having engine problems like boost dropping off or exhaust temps getting high.
These are very important if your dragging a trailer and working the engine hard.
#9