I have a quadzilla adrenaline and have it all hooked up except the part for tapping into my vp. my question is wht wire do I have to tap into on the pump? all help and as detailed would be greatly appreciated! Thanks its on a 2001 24 valve.

 

https://www.dieselbombers.com/5-9l-2...e-tapping.html

 

Is the wire I need to tap into the wire closest to the engine bay that goes into the pump? amd I was told that the wire to tap into was different than the stock vp because this is a hot rod, or doesn't that make any difference? what wire do I tap into?

 

I don't know if the hot roded version is wired differently. But I believe I tapped the one closest to the engine, cant remember been a while since install.

 

There are two wire bundles IIRC. You might only see the top bundle. Take the insulator off of it and it's the wire in that bundle that is closest to the engine. That is on a STOCK pump. I don't know if they wire high output pumps differently (I'm not sure why they would though)