24 Valve 2nd Gen Dodge Cummins 98.5-02 Discussion of 24 Valve 5.9 Liter Dodge Cummins Diesels with VP44 Injection Pumps
Sponsored by Trailer Plus

VP44 questions / intermittent dead peal

Old Apr 11, 2013 | 07:46 AM
  #1  
chuffysplace's Avatar
Thread Starter
|
Diesel Enthusiast
Joined: Apr 2012
Posts: 129
Likes: 6
From: Milford, PA
Default VP44 questions / intermittent dead peal

I have another recent thread that helped me get closer to troubleshoot my intermittent dead pedal issue, but I thought I’d start a more specific one for this now that I know a bit more. Truck in my signature, 15-20 fuel psi at the VP44 but I’m getting p0216 and p1693 along with my intermittent dead pedal. Truck has 90K on it. Drives good, expect for this issue.Plenty of power, unless it intermittently misbehaves. Anyway…a couple of questions:

1. If it is the VP44, is there a better way to diagnose it to verify it is truly that (I’d hate to spend that much $ if it isn't the root cause)? I’m reading one way is to check the APPS with an analog voltmeter while driving the truck, hoping it misbehaves, when it does, check the volt meter to determine of the APPS is faulty. If it isn't – it’s the VP44. Is this true or is there a different, better way…or is this even necessary?

2. If it is the VP44, I’m reading this issue could be caused by the computer on top of the pump. Due to heat cycles, the solder joints / connections failures.
Is replacing only the computer a viable option for me, rather than replacing the pump)?

3. If I do have to replace the VP44, should I go new or rebuilt? Obviously I’d want a good one! Any preferred companies to go with or ones to stay away from (feel free to PM me if you prefer).

Thanks in advance.
 
Reply
Old Apr 11, 2013 | 12:09 PM
  #2  
MillerBoyzDiesel's Avatar
Diesel Wrench
Joined: Dec 2011
Posts: 763
Likes: 39
From: Kentucky
Default

p0216 dead give away needs new vp. you cant replace the module on top of the pump separate. Have to get an entire pump. Most replacement pumps youll find are rebuilt units. Just about every vp truck on the road is more than likely running a rebuilt pump.
 
Reply
Old Apr 11, 2013 | 06:42 PM
  #3  
Bryce's Avatar
Diesel Enthusiast
Joined: Sep 2012
Posts: 403
Likes: 28
From: Carl Junction, MO
Default

Take a look at this Chris https://www.dieselbombers.com/98-5-0...ronic-fix.html Before trying it you may want to go ahead and get a new pump just incase it doesn't work. Here is some more info for you VP44 Diagnostic

---AutoMerged DoublePost---

Set your edge to show throttle % and see if it drops to 0% when it acts up.
 

Last edited by Bryce; Apr 11, 2013 at 06:43 PM. Reason: Automerged Doublepost
Reply
Old Apr 15, 2013 | 07:16 AM
  #4  
chuffysplace's Avatar
Thread Starter
|
Diesel Enthusiast
Joined: Apr 2012
Posts: 129
Likes: 6
From: Milford, PA
Default

it's fixed. APPS reset fixed it for me. No more codes, so far so good. I did file away Bryce's info though - this sounds very valuable to have one day. Might be a cheap fix. I think what might have caused my intermittent dead pedal was related to me leaving the headlights on for 3 hours or so. Although my batteries were good and the truck started fine, I had this issue ever since then and the codes along with it. The APPS reset, seemed to do the trick. No more codes either! Thanks again all.
 
Reply
Related Topics
Thread
Thread Starter
Forum
Replies
Last Post
burndiesel
24 Valve 2nd Gen Dodge Cummins 98.5-02
10
Feb 7, 2023 01:15 AM


Thread Tools
Search this Thread

All times are GMT -5. The time now is 02:47 PM.