Running odd after injector swap
#1
Running odd after injector swap
A kid in town installed 100hp injectors and now it has no power or seems dead above 2000rpm. He said he had a new lift pump put in and is running without any programmer. Could this be because the cross over tubes are not tight enough? Im just throwing ideas out...
#2
#3
Just went for a ride in the truck and i agree with you 100%. it seems to have a little more grunt but it still has stock timing, and de-fuel settings. It runs right up to 2000 and creeps to 2300. No missing no popping, everything sounds like it should. Sorry for posting before seeing truck first hand guys!!
#4
It should still rev without any problems. Have you checked for codes? Sounds like it could be the apps. I would suggest trying an apps reset. If that doesn't work test the apps following the procedure on this link VP44 Diagnostic
#6
#8
#9
#10
Thread
Thread Starter
Forum
Replies
Last Post
CumminsAtYa
6.7 Liter Dodge Cummins 07.5-12
0
03-17-2015 09:23 AM
carid
Diesel Bombers Sponsors
0
01-12-2015 04:32 AM
ssmith.77
Chevy/GMC 6.2L and 6.5L
7
01-11-2015 02:03 PM