I've done a search and didn't come up with a direct answer. I read here and alot of guys are saying there boost is 20+ . My truck at wot is only making 16 tops thats it aint getting anymore. The thing is a slug at times. It does have 230k on the clock. starts and idles great and runs great other wise. am I crazy for thinking my truck should be making more boost in stock form? Or is there stuff I need to check on?

In stock form, the ecm is going to limit boost to 20-22psi. You probably have a boost leak so check your connections at the turbo, intercooler, and intake. Here is a link to building a boost leak tester. https://www.dieselbombers.com/dodge-...tructions.html

My 01 Auto with the HY35 turbo only hit 17psi in stock form. With a HX35 swapped on RV275 injectors and Edge Comp set on 5 it will hit 35psi with a boost elbow in the turbo. My truck has 460,000kms on it now.

I don't know what my boost was stock but with stock injectors, hy35 turbo, and edge juice I'm topping out at 32psi. A stock truck is capable of more boost but a boost fooler has to be installed (quadzilla boost fooler, edge juice, edge comp, quad adr, ect).

Thanks for the link on building a pressure tester.
Does the edge comp, have a boost fooler built into the programming? I've got an edge comp, that I got screwed on and have to send it to edge to get fixed. but once I get that back. it will be installed on the truck
Word of advice, only pay with Paypal when buying used electronics over the net. I went against my better judgement and got bit.

My truck pretty much stock will build 20 PSI easy.

Yes they have the boost fooling built right into them.

44psi here

hmmm i need studs and head gasket now

i have a stock truck with 215k on it and im getting 27 psi granted i have a small 65hp chip