Need info on oil and filters
#21
#22
Cat 1R-0751 filter will fit on the airdog but you will have to grind part of the bracket on the pump as the cat is slightly bigger than the airdog filters. I suggest you get the airdog 10 micron filter to put on the pump and then buy a remote filter housing, install it between the vp and the airdog, and put a 2 micron cat filter there.
#23
#25
#26
#27
#28
Yea, your gonna have fun reprimeig the cummins, Im not familiar with the ari dog system but I would crack injection lines 1,3,4 untill you get fuel then close them back up and start the truck its gonna run rough for a minute, but hop in the truck and bring the rpms up to 1200 for a couple of minutes and your set!! just make sure your injection lines are tight enough over a good snug will be good 18ftlbs..
#29
#30