24 Valve 2nd Gen Dodge Cummins 98.5-02 Discussion of 24 Valve 5.9 Liter Dodge Cummins Diesels with VP44 Injection Pumps
Sponsored by Trailer Plus

VP44 Replacement.

Old Mar 10, 2008 | 08:07 AM
  #1  
Nitelord's Avatar
Thread Starter
|
Diesel Bomber
Joined: Jul 2007
Posts: 4,980
Likes: 223
From: Pottstown, PA
Default VP44 Replacement.

Codes:
P0251, P0252, P0602 & P1693

Driving down the road, went to pass a truck and everything went quiet. Coasted about a mile down hill and parked it. Truck turns over, but won't fire.

My mechanic is towing it to the shop today.
My guess is the injection pump, I have fuel at the fuel filter, so I know the lift pump is fine.

He is going to put the FASS system on, as well as the fuel pressure gauge and boost gauge.

Just need to see what the IP is doing.

* Everyone still recommend the Hot Rod VP44?

I'm running An Edge Drag Comp stacked with a Smarty, After market air intake, 4" exhaust. FASS Fuel Sys. (after today) Injectors are probably the only other bomb I'm planning on. Then a tranny.

Thanks, Mark
 
Reply
Old Mar 10, 2008 | 08:23 AM
  #2  
Uncle Bubba's Avatar
BOMBARDIER
Joined: Mar 2007
Posts: 12,854
Likes: 1,112
From: Illinois?
Default

I've never been a believer in the HRVP's myself, but I don't say that to loud cause it get's me yelled at to often. So far nobody has shown me side by side dyno's of the difference and these pumps have been out for some years now. I also don't understand the logic behind them. Your injectors restrict the amount of fuel that get's through to the cylinders so as song as the injectors are not being short changed on fuel how can any pump create more power. The computer controls the amount of fuel and the injectors limit it, where in here does the pump figure in.

I'll take some lumps for this one, but I've asked these questions many times and so far have never gotten an answer that has shown me where I'm wrong here.
 
Reply
Old Mar 10, 2008 | 09:03 AM
  #3  
mysterync's Avatar
Diesel Bombers Sponsor
Joined: Mar 2007
Posts: 3,791
Likes: 367
From: Blowing Rock,NC
Default

The HRVP is not a very good option! Stick with the SO, They can be had from a quality rebuilder for around $900-955.00! Secondly, I would say, it is your pump... but without being at the truck its hard to say!!
If I can help, Give me a Call!

Thanks
Lucas
 
Reply
Old Mar 10, 2008 | 09:55 AM
  #4  
Dr. Evil's Avatar
BOMBARDIER
Joined: Mar 2007
Posts: 23,293
Likes: 1,322
From: North of You
Default

What he said....dont waste the extra $ on the Hot Rod pump. A couple of my buddies went that route and wernt happy.
 
Reply
Old Mar 10, 2008 | 03:10 PM
  #5  
Diesel Dawgs Performance's Avatar
Joined: Mar 2007
Posts: 14,546
Likes: 843
From: Western NC
Default

X2

Stick with a SO Pump
 
Reply
Old Mar 10, 2008 | 03:21 PM
  #6  
HOTMOPR's Avatar
Diesel Enthusiast
Joined: Mar 2007
Posts: 297
Likes: 15
From: SW, Wa
Default

Call Rip at sourceautomotive.biz He will warranty a pump even if your gonna tap it. Just tell him you are when you order it..
 
Reply
Old Mar 10, 2008 | 04:16 PM
  #7  
Dr. Evil's Avatar
BOMBARDIER
Joined: Mar 2007
Posts: 23,293
Likes: 1,322
From: North of You
Default

Originally Posted by HOTMOPR
Call Rip at sourceautomotive.biz He will warranty a pump even if your gonna tap it. Just tell him you are when you order it..

Really?



Ya got to like that.....
 
Reply
Old Mar 10, 2008 | 04:21 PM
  #8  
Uncle Bubba's Avatar
BOMBARDIER
Joined: Mar 2007
Posts: 12,854
Likes: 1,112
From: Illinois?
Default

Blue Chip Diesel has the same warranty on his pumps as long as you use the cover plate and not a wire tap.
 
Reply
Old Mar 11, 2008 | 03:25 AM
  #9  
I-6DZL's Avatar
Diesel Fan
Joined: Mar 2007
Posts: 83
Likes: 2
Default

Why not get a monster pump. I'll bet they'd kick the dog poo out of a HRvp, or So vp!!
Call FBD for more specifics. Have fun and enjoy!
 
Reply
Old Mar 11, 2008 | 08:33 AM
  #10  
mysterync's Avatar
Diesel Bombers Sponsor
Joined: Mar 2007
Posts: 3,791
Likes: 367
From: Blowing Rock,NC
Default

The Vendor thats a big part in manufacturing the Monster is Here, Why not use him?

L
 
Reply

Thread Tools
Search this Thread

All times are GMT -5. The time now is 12:28 PM.