Ok so I was looking at a local farm supply store last night (rural king) at oils and what not. What is everyone running 15-40 rotella? Or 1030? How many quarts do these take? I saw some amsoil but it was only in the quart for like 7-9 bucks a quart:eek:. they had rotella in 2.5 gallon jugs for like 30 sumthing and in the 1 gallon for 13.65 or something. Next is 2 cycle to add to fuel. I couldn't remember and got confused on if it should have to tcw 3 in it or NOT. Please help me out as im new to dodge motors. Thanks
Adam

Sent from my DROID BIONIC

 

Rotella 15-40 is the best in my opinion. Everyone I know agrees on Rotella... I think its 3 gallon jugs will do ya. I have sleep since my last oil change so you "might" be good with 3.

 

10 to 11 quarts and i run motorcraft 15W40 since i work for a ford dealship but i use to use rotella, i run alot of used filter tranny fluid in my truck only down far is it stinks!!! i run 80% tranny and 20% diesel in the summer.

 

Ok. Do what about tcw3

Sent from my DROID BIONIC

 

15-40 Rotella, I don't run 2 stroke oil I need to. Just make sure it is ash-less.

Check this thread out.....https://www.dieselbombers.com/24-val...-additive.html

 

Jerrod that's about turbos .

Sent from my DROID BIONIC

 

Really? It sends me to a fuel additive thread.

 

yeah tried it twice.

Sent from my DROID BIONIC

 

i use to run air craft oil its ash less and some are very light weight when i worked at a avaiton place n i ran jet fuel toooo

 

I run the cheap 2 stroke oil from wal mart.I'm pretty sure it's TC3 and put a small bottle every fill up.