1st Generation Dodge Cummins 89-93 Discussion of 12 Valve 5.9 Liter Dodge Cummins Diesels with Rotary Injection Pumps

engine wiring

Thread Tools
 
Search this Thread
 
  #1  
Old 04-16-2012, 11:25 AM
trbodart's Avatar
Newbie
Thread Starter
Join Date: Apr 2012
Posts: 3
Likes: 0
Received 0 Likes on 0 Posts
Default engine wiring

Hey everyone, I'm brand new to this site and looking for some assistance on my 1991.5 dodge d350, I just got it and it's my first diesel, I'm actually looking for a wiring diagram if anyone has one. the problem is I have no overdrive. I've checked the tps and it looks to be operating perfect, checked each wire at the od module and it seems good. It's getting 12v to the od solenoid. While checking the connector while unplugged from the trans temp sensor i'm only getting about 1v, I believe it should be 5v, correct? I ohmed out the red/white wire from the connector up top to the trans temp sensor plug and I have continuity, then I ohmed out the orange/black wire, I think I got around 8 ohms of resistance, so i'm assuming I have a short. If anyone has a diagram or some feed back i'd appreciate it, thanks.
 
  #2  
Old 04-21-2012, 06:09 AM
83cucv1028's Avatar
Diesel Fan
Join Date: Aug 2009
Location: new port richey, fla
Posts: 28
Likes: 0
Received 0 Likes on 0 Posts
Default

try dropping the trans pan, the wires for the od sensor run across the valve body and can rub on it and ground out, happened to me on a 90 dodge that i had.
 
  #3  
Old 04-23-2012, 05:35 PM
trbodart's Avatar
Newbie
Thread Starter
Join Date: Apr 2012
Posts: 3
Likes: 0
Received 0 Likes on 0 Posts
Default

I thought i had a wiring problem to the trans temp sensor but after tracing some wiring found that the coolant temp sensor is in series with the trans temp sensor, still trying to figure out the od problem, does anyone have a diagram for at least the overdrive circuit and related components or know where i could get a diagram, i've been searching the web with no luck, i'm going nuts trying to figure this one out, any help would be appreciated.
 
Related Topics
Thread
Thread Starter
Forum
Replies
Last Post
burndiesel
24 Valve 2nd Gen Dodge Cummins 98.5-02
10
02-07-2023 01:15 AM
klein444
Chevy/GMC 6.2L and 6.5L
13
06-20-2015 11:48 PM
metal_miner
Diesel Engine Conversions
7
12-23-2014 11:40 PM
Mike H
12 Valve 2nd Gen Dodge Cummins 94-98
1
11-25-2014 03:13 PM
hunt4beer
5.9 Liter CR Dodge Cummins 03-07
5
11-15-2014 09:06 AM



Quick Reply: engine wiring



All times are GMT -5. The time now is 10:45 AM.