hx35 swap
#1
hx35 swap
i just picked up an hx35 off of a 1996 5 speed truck. it only has 99xxx miles on it but i do not know the exact size of the exhaust housing from a manual tranny truck. is it 16cm? and how much boost psi is safe to run through this turbo? just picked it up for 150$ so i cannot complain, eventually gonna do a hx40 hybrid.
#2
All dodge p-pump engines I know of came with 12cm turbine housings
---AutoMerged DoublePost---
And I'm not necessarily saying its a good idea but I've seen several guys run 60 psi continually and not hurt the hx35
---AutoMerged DoublePost---
And I'm not necessarily saying its a good idea but I've seen several guys run 60 psi continually and not hurt the hx35
Last edited by welderboy250; 04-15-2012 at 07:11 AM. Reason: Automerged Doublepost
#3
#5
#6
#8
The following users liked this post:
TxCummins41 (04-19-2012)
#9
#10
It will have a 12CM waste gated housing. All HX35's n WH1C's had a 12cm waste gated housing. hy35's had a 9CM waist gated housing.
I did the swap on mine yesterday cuz I had it to try n help with EGT's till I get a bigger one to help with the big injectors. I reused the gasket between the manifold n housing, it's just a flat piece of tin.
I did the swap on mine yesterday cuz I had it to try n help with EGT's till I get a bigger one to help with the big injectors. I reused the gasket between the manifold n housing, it's just a flat piece of tin.