1st Generation Dodge Cummins 89-93 Discussion of 12 Valve 5.9 Liter Dodge Cummins Diesels with Rotary Injection Pumps

had a wreck need parts

Thread Tools
 
Search this Thread
 
  #1  
Old 02-21-2012, 10:14 PM
1stgenSappy's Avatar
Diesel Fan
Thread Starter
Join Date: Dec 2010
Location: North eastern CO
Posts: 56
Received 0 Likes on 0 Posts
Default had a wreck need parts

Long story short my pickup got hungry so I fed it a kia but it choked a little so now i need eveything from the engine foreword. I have an electric fan I have been putting off installing so that will be going in and a 2nd gen intercooler but that's all I have where can I get the radiator/grill support, radiator, grill, the air conditioning cooler thing, and the piece that fills the space between the bumper and grill. Any input is much appreciated!!!
 
  #2  
Old 02-21-2012, 10:55 PM
flyingcrodeo's Avatar
Diesel Enthusiast
Join Date: Jan 2010
Location: Madill, OK
Posts: 260
Likes: 0
Received 4 Likes on 4 Posts
Default

Ebay and do alotta searchin on craigslist
 
  #3  
Old 02-22-2012, 08:27 AM
1stgenSappy's Avatar
Diesel Fan
Thread Starter
Join Date: Dec 2010
Location: North eastern CO
Posts: 56
Received 0 Likes on 0 Posts
Default

Ok ill check that out. I wish LMC covered our pickups but they don't so I didn't know where to look.
 
  #4  
Old 02-22-2012, 10:48 AM
flyingcrodeo's Avatar
Diesel Enthusiast
Join Date: Jan 2010
Location: Madill, OK
Posts: 260
Likes: 0
Received 4 Likes on 4 Posts
Default

Yeah NOBODY makes aftermarket parts for these trucks I wish LMC had everything for these like they do every chevrolet ever built. If you just had a frame you could built a completely new chevy from like 50's to 90's by ordering everything out of their catelog but they only go from 94 and up on Dodge. I've found alot on ebay and cheap too and you gotta look at differant times because every now and then you'll see a complete trim set for sale or interior trim or dash or door panel and little stuff like that but another bet is to look in yellow pages and find ya a salvage yard close by that'll let ya walk around and strip what ya want from vehicles. Their real cheap too.
 
  #5  
Old 02-22-2012, 11:11 AM
1stgenSappy's Avatar
Diesel Fan
Thread Starter
Join Date: Dec 2010
Location: North eastern CO
Posts: 56
Received 0 Likes on 0 Posts
Default

Are most of the body panels and such the same on a gasser? None of the salvage yards around here have the diesel pickups but there is a few gas pickups.
 
  #6  
Old 02-22-2012, 01:28 PM
flyingcrodeo's Avatar
Diesel Enthusiast
Join Date: Jan 2010
Location: Madill, OK
Posts: 260
Likes: 0
Received 4 Likes on 4 Posts
Default

Yeah i'm 90% sure they are and if you can go with parts from another pickup because the metal is thicker than the new replacement ones you get off of ebay and stuff and plus they will fit perfectly sometime the new ones you order might be a lil off and then you gotta do some fabbing but i'm not sure the radiator core support will be the same cuz the diesel might have a larger radiator but again i dont know but the hood and fenders should fit.

---AutoMerged DoublePost---

Also try

PartsTrain.com - Hard to Find Auto Parts and Truck Parts

wholesaleautoparts.com: The Leading Auto Part Wholesale Site on the Net

and Truck Accessories & Truck Parts | Ford, Chevy, Dodge, GMC | Stylin' Trucks

They got some stuff too
 

Last edited by flyingcrodeo; 02-22-2012 at 01:28 PM. Reason: Automerged Doublepost
Related Topics
Thread
Thread Starter
Forum
Replies
Last Post
98cummins
For Sale
1
01-28-2015 04:59 PM
David Scott
Wanted To Buy (WTB) - Used
0
01-21-2015 10:27 PM
carid
Towing and Hauling
0
10-27-2014 10:46 AM
Sculpturesylvan
General Diesel Related
0
10-18-2014 10:40 PM
Sculpturesylvan
General Diesel Related
0
10-18-2014 10:19 PM



Quick Reply: had a wreck need parts



All times are GMT -5. The time now is 12:55 PM.