as some of you may know from previous threads my truck was in a accident and im trying to rebuild the front end well today i put a new radiator support and radiator in and there isnt enough gap between the radiator and the fan core to stick my finger inbetween i never paid attention before but is this normal or is my truck tweeked in a bad way i thought possibly about a electric fan to but thought i would see what you guys said

 

Take a close look at the frame, if it's buckled anywhere it won't be too hard to spot. One finger width I feel is too close. I think my factory fan was an inch or better from the radiator.


Sent from my iPhone using Tapatalk

 

what do you mean by factory fan did you replace the old one and i didn't notice any buckles but i might be wrong i was thinking on trying to find a junk yard electric fan and putting it on there because my thinking is like yours its a little to close for confornt especcialy for a brand new 400$ radiator

 

I have a twin derale electric fan on mine, and about a good inch of clearance from the fluidampr to radiator (which is about 1/2 in. Thicker than your factory damper.


Sent from my iPhone using Tapatalk

 

Sorry, not radiator... Fan shroud


Sent from my iPhone using Tapatalk

 

well my problem is that the frame is bent on the driver side so i had to cut a hole and move everything up on the frame and move it out i guess ill have to even the bumper out or something but i got it to where it will move maybe in another week ill have it back on the road and does any know that if it was totaled will i have to get a different title salvaged title

 

In colorado if its has been deemed totaled and you keep it and it passes inspection you get a salvage title.

 

If your frame is bent you may have some tracking issues with the truck... You may try taking it to a collision shop and having the frame pulled.


Sent from my iPhone using Tapatalk