conversion wire up?
hi got a 68 dodge putting a 93 5 spd 4x4 compleat running gear under. Getting to the point of wiring the motor. What do II bare bones need without installing the pcm and how many things can be used without the pce? Ie: fuel heater grid heater and the likes thanks
Bare bones you will need the starter stuff and the fuel cut off if you want to cut it off with the key, otherwise you can install a pull cable. With put pcm your OD won't work except on a swith and your speedo wont work, niether will your grid heaters, you can switch them too. Really not that much more to wire it up and everything will work as normal.
Bare bones you will need the starter stuff and the fuel cut off if you want to cut it off with the key, otherwise you can install a pull cable. With put pcm your OD won't work except on a swith and your speedo wont work, niether will your grid heaters, you can switch them too. Really not that much more to wire it up and everything will work as normal.
Thread
Thread Starter
Forum
Replies
Last Post
Torkjunky
12 Valve 2nd Gen Dodge Cummins 94-98
7
Nov 20, 2018 08:46 PM
CGwill
24 Valve 2nd Gen Dodge Cummins 98.5-02
0
Jan 26, 2015 02:10 AM





stepside or utility box?
