has anyone tried to use a 4in down pipe off a second gen for a 91 w250 5spd 4x4 if any suggestions let me know i cant seem to get a good smooth bend on my 4in stainless and dont wanna wast anymore but i can do from the down pipe back..

 

The second gen pipe will work as long as you have the cast elbow that clamps to the turbo. Ive run a 2nd gen 4" turbo back on every 1st gen I've owned.

 

does that work with the stock hx turbo? cus ive heard rummors it wont. and dimond eye make the 4 inch one i believe it is fairly cheap and some of the guys here on db make them and sell them to for pretty cheap. i need to do this also and second gens are all over the junk yards here with downpipes if that will work thats what ill do. thanks

---AutoMerged DoublePost---

i meant h1c sorry