1st Generation Dodge Cummins 89-93 Discussion of 12 Valve 5.9 Liter Dodge Cummins Diesels with Rotary Injection Pumps

water/ meth injection

Thread Tools
 
Search this Thread
 
  #11  
Old 06-30-2011, 12:40 PM
KD93's Avatar
Diesel Bomber
Join Date: Apr 2010
Location: West Palm Beach, Fl.
Posts: 1,245
Received 150 Likes on 108 Posts
Default

Originally Posted by BC847
Skip the over-sized injection lines ~ waste of money.
x2.
 
  #12  
Old 07-14-2011, 12:25 PM
t-bone117yamaha's Avatar
Diesel Enthusiast
Thread Starter
Join Date: Apr 2011
Location: tricities
Posts: 211
Likes: 0
Received 3 Likes on 3 Posts
Default

hey guys have you ever thought of buying a 55 gallon drum of methonol? if i calculated right it comes out to 17.7 full tanks in the 7 gallon tank that comes in the snow max kit shouldent that be about a years worth? and that is $3.09 a gallon for strait meth does that sound reasonable?
 
  #13  
Old 07-14-2011, 05:27 PM
backwoodsW250's Avatar
Diesel Fan
Join Date: Jan 2011
Location: Lexington, nc
Posts: 36
Received 0 Likes on 0 Posts
Default

You just have to keep it clean and don't let any trash in it. Just be sure to go no more than 49% meth to a gallon and your good to go for around 1.55 a gallon. Oh and DON'T SMOKE AROUND IT!!!!!!
 
  #14  
Old 07-14-2011, 05:34 PM
BC847's Avatar
Diesel Enthusiast
Join Date: Nov 2008
Location: In an old bus, down
Posts: 438
Received 108 Likes on 71 Posts
Default

Where do you get 49%? Just curious.

I run a 50/50% mix all the time. I've read of some folks running up to 70% meth but I expect they most likely have issues with pre-ignition.

It's been my experience that a 50/50% mix is relatively non-flammable (I've tried burning a mist of it. It only made my lighter wet).

 
  #15  
Old 07-14-2011, 05:39 PM
backwoodsW250's Avatar
Diesel Fan
Join Date: Jan 2011
Location: Lexington, nc
Posts: 36
Received 0 Likes on 0 Posts
Default

Just in people I have talked to with the cummins you don't want to hit the flammable mark when your grid heater can come on. That would be bad so just erring on the side of caution don't want a fellow 1st gen going down in flames
 
  #16  
Old 07-14-2011, 07:11 PM
Begle1's Avatar
Diesel Bomber
Join Date: Mar 2007
Location: Capo Beach, CA
Posts: 3,910
Received 335 Likes on 247 Posts
Default

Mmm.... Water injected over long periods of low-load operation.

Name:  IMG_0724.jpg
Views: 768
Size:  130.8 KB

Name:  IMG_0734.jpg
Views: 601
Size:  54.8 KB
 
  #17  
Old 07-15-2011, 08:42 AM
backwoodsW250's Avatar
Diesel Fan
Join Date: Jan 2011
Location: Lexington, nc
Posts: 36
Received 0 Likes on 0 Posts
Default

Is that a oil/water mix and where did that come from? Mine has never done any thing like that
 
  #18  
Old 07-15-2011, 09:31 AM
Begle1's Avatar
Diesel Bomber
Join Date: Mar 2007
Location: Capo Beach, CA
Posts: 3,910
Received 335 Likes on 247 Posts
Default

I can do that at will on mine. Somehow it never happens to anybody else. I must be doing something special, can't figure it out though.
 
  #19  
Old 07-15-2011, 10:05 AM
t-bone117yamaha's Avatar
Diesel Enthusiast
Thread Starter
Join Date: Apr 2011
Location: tricities
Posts: 211
Likes: 0
Received 3 Likes on 3 Posts
Default

the 55 gallon drum if 98%meth but then i mix it with water to get my 49% 51% right? and ill proly go a little leener because i dont want to harm my truck, how do you know when the grid heater is on? and none in my family smokes and they are the only ones who will know where it is
 
  #20  
Old 07-15-2011, 10:25 AM
backwoodsW250's Avatar
Diesel Fan
Join Date: Jan 2011
Location: Lexington, nc
Posts: 36
Received 0 Likes on 0 Posts
Default

Yeah you mix it with plain water. The heater cycles on and off in cool to cold weather and to know when it working just watch your voltage gauge
 


Quick Reply: water/ meth injection



All times are GMT -5. The time now is 04:03 PM.