1st Generation Dodge Cummins 89-93 Discussion of 12 Valve 5.9 Liter Dodge Cummins Diesels with Rotary Injection Pumps

charging issue... AGAIN!!

Thread Tools
 
Search this Thread
 
  #1  
Old 04-17-2011, 01:37 PM
jdbigblue12v's Avatar
Diesel Wrench
Thread Starter
Join Date: Mar 2011
Location: new york
Posts: 502
Received 12 Likes on 10 Posts
Default charging issue... AGAIN!!

so i was out side before and letting the truck idle after driving, and out of no where a strange high pitch noise came through the speakers. i looked down at the vlotage meter in the cluster and it was pulsating and seemed like it wanted to move down to 18v. i tuned everything on, lights running lights, hit the brakes, radio, defroster and hazards. nothing happend and it continued to make the noise for about 30 seconds after than stopped and voltage meter dropped down to 14 again!!!???!??!??! im so far confused and am getting sick of electrical problems! some one please help! thanks james
 
  #2  
Old 04-18-2011, 06:40 AM
cumminskid92's Avatar
Diesel Enthusiast
Join Date: Dec 2008
Posts: 305
Received 4 Likes on 4 Posts
Default

have you replaced the voltage regulator. i have never heard of one jumping around in voltage but who knows with the wonderful 1st gen. electrical system.
 
  #3  
Old 04-18-2011, 10:07 AM
jdbigblue12v's Avatar
Diesel Wrench
Thread Starter
Join Date: Mar 2011
Location: new york
Posts: 502
Received 12 Likes on 10 Posts
Default

isnt the voltage regulator internal?
 
  #4  
Old 04-18-2011, 10:41 AM
cumminskid92's Avatar
Diesel Enthusiast
Join Date: Dec 2008
Posts: 305
Received 4 Likes on 4 Posts
Default

im pretty sure it is on the firewall. mine was anyways

---AutoMerged DoublePost---

ok so i was looking around and from what i can find trucks pre 92 have external regulators either on the fender or firewall. 92 and up have the regulators built into the ECM.
 

Last edited by cumminskid92; 04-18-2011 at 10:41 AM. Reason: Automerged Doublepost
  #5  
Old 04-18-2011, 11:57 PM
jdbigblue12v's Avatar
Diesel Wrench
Thread Starter
Join Date: Mar 2011
Location: new york
Posts: 502
Received 12 Likes on 10 Posts
Default

i have a 1993 so its built in
 
  #6  
Old 04-19-2011, 12:29 AM
crazy clem's Avatar
Diesel Fan
Join Date: Jul 2010
Location: langley B C
Posts: 96
Received 6 Likes on 5 Posts
Default

lots of these trucks have grounding issues. a buddies truck was having issues like yours, we added an new ground to the rad support and that cured it. another issue that we found at the same time was that his battery had a film on it, and we were getting 8 volts from the battery case to ground , maybe that was screwing up the pcm . ithink the pcm regulates the alternator on the 93 . good luck
 
  #7  
Old 04-20-2011, 07:27 PM
jdbigblue12v's Avatar
Diesel Wrench
Thread Starter
Join Date: Mar 2011
Location: new york
Posts: 502
Received 12 Likes on 10 Posts
Default

i re-did all the grounds and it helped but still having problems. what do you mean by film on the battery?
 
  #8  
Old 04-20-2011, 10:57 PM
crazy clem's Avatar
Diesel Fan
Join Date: Jul 2010
Location: langley B C
Posts: 96
Received 6 Likes on 5 Posts
Default

It was a greasy type of film like the batt had been overcharging you could actually run your finger across top and leave a mark in the dirt . disconnected batt and cleaned it usual way with baking soda and warm water.
 
Related Topics
Thread
Thread Starter
Forum
Replies
Last Post
Diesel Bombers
General Diesel Related
1
12-10-2019 10:10 AM
norcal6.5
Chevy/GMC 6.2L and 6.5L
1
12-07-2014 07:04 PM
Diesel Bombers
General Diesel Related
0
10-23-2014 08:10 AM
hemiheath
12 Valve 2nd Gen Dodge Cummins 94-98
1
10-15-2014 11:49 AM
Diesel Bombers
General Diesel Related
0
10-08-2014 08:10 AM



Quick Reply: charging issue... AGAIN!!



All times are GMT -5. The time now is 03:01 AM.