Alternator Guage?
#1
Join Date: Nov 2009
Location: El Dorado Springs MO
Posts: 498
Likes: 0
Received 20 Likes
on
16 Posts
Alternator Guage?
My alternator guage started flickering back and forth today if I turn the headlights off and on a few times it stops and sometimes it dissent stop but it still charges right around 14 but the flickering is really anoying and if I hold it at higher rpm it stops flickering also any ideas would be nice thanks.
#4
#6
bad ground i fought that for about 3 weeks once then the whole dam truck quit get a common bus and start running ground wires to stock locations and non stock locations such as.....
Behind #6 valve cover
front clip by batt
lower dash support
gauge cluster
parking brake release (theres a screw there)
bed in 2 spots
under cab in 2 spots
any time someone has a electrical issue thats what we to and recommend works every time
do the one behind #6 that dose ALOT including head lights
Behind #6 valve cover
front clip by batt
lower dash support
gauge cluster
parking brake release (theres a screw there)
bed in 2 spots
under cab in 2 spots
any time someone has a electrical issue thats what we to and recommend works every time
do the one behind #6 that dose ALOT including head lights
#7
#9
a common buss is this http://www.canadianmarineparts.com/w...es/FS40720.jpg
thats actually the exact one that I have and that I use
on the back of #6 its right behind there on the fire wall you have to look under all the factory insulation and what not its too cold for me to go out and take pics
these trucks only have like 2-4 grounds factory so put as many as you want anywhere you cant over ground
thats actually the exact one that I have and that I use
on the back of #6 its right behind there on the fire wall you have to look under all the factory insulation and what not its too cold for me to go out and take pics
these trucks only have like 2-4 grounds factory so put as many as you want anywhere you cant over ground