1st Generation Dodge Cummins 89-93 Discussion of 12 Valve 5.9 Liter Dodge Cummins Diesels with Rotary Injection Pumps

DragSTRIP Video

Thread Tools
 
Search this Thread
 
Old Jan 21, 2011 | 08:32 PM
  #1  
sshort's Avatar
Thread Starter
|
Diesel Fan
Joined: Sep 2010
Posts: 46
Likes: 1
From: Bloomingdale MI
cool DragSTRIP Video

check this out
 
Reply
Old Jan 21, 2011 | 11:29 PM
  #2  
EasternAggie's Avatar
Diesel Bomber
Joined: Jul 2010
Posts: 2,139
Likes: 107
From: Broken Bow, Oklahoma
Default

13.6 not bad at all
 
Reply
Old Jan 21, 2011 | 11:43 PM
  #3  
Red_Rattler's Avatar
High Tech Redneck

Joined: Nov 2007
Posts: 6,730
Likes: 496
From: Columbus WI
Default

Nice running and looking truck!
 
Reply
Old Jan 22, 2011 | 12:39 AM
  #4  
901stgen's Avatar
Diesel Enthusiast
Joined: Oct 2010
Posts: 360
Likes: 34
From: Kempton, Indiana
Default

Pretty darn quick!
 
Reply
Old Jan 23, 2011 | 09:12 PM
  #5  
IrishChamp's Avatar
Diesel Fan
Joined: Feb 2010
Posts: 28
Likes: 3
From: Reno NV
Default

Nice man, how much power are you putting down?
 
Reply
Old Jan 23, 2011 | 09:43 PM
  #6  
sshort's Avatar
Thread Starter
|
Diesel Fan
Joined: Sep 2010
Posts: 46
Likes: 1
From: Bloomingdale MI
Default

Iam not sure I dynoed it a couple years ago & it was 272hp & torque was like 489? but i have changed a lot since then I am going to try & dyno again this spring if get a chance I also just changed injectors Last time i did not have water/meth or nitrous
 
Reply
Old Jan 23, 2011 | 10:12 PM
  #7  
IrishChamp's Avatar
Diesel Fan
Joined: Feb 2010
Posts: 28
Likes: 3
From: Reno NV
Default

Cool, well that thing scoots!
What besides a converter have you done to the transmission, how's it holding up? 727 non OD or a518?
Originally Posted by sshort
Iam not sure I dynoed it a couple years ago & it was 272hp & torque was like 489? but i have changed a lot since then I am going to try & dyno again this spring if get a chance I also just changed injectors Last time i did not have water/meth or nitrous
 
Reply
Old Jan 23, 2011 | 10:32 PM
  #8  
sshort's Avatar
Thread Starter
|
Diesel Fan
Joined: Sep 2010
Posts: 46
Likes: 1
From: Bloomingdale MI
Default

727 it has mopar performance clutches trans go shift kit d rail pan I had the pressure plate in the forward clutch milled down so i could run 5 discs in it I built it my self about 2 years go It also pulls my toy trailer witch empty weighs 11,400 I would like to install a gear vendors in it some day I also need to install a locker in the rear the 1/4 mile runs were with a open differential when im done it will run high 12,s & still be able to pull my camper Im just rolling off the line with less then 10psi boost so i don't loose traction
 
Reply
Old Jan 23, 2011 | 11:52 PM
  #9  
IrishChamp's Avatar
Diesel Fan
Joined: Feb 2010
Posts: 28
Likes: 3
From: Reno NV
Default

Nice to hear the transmission works so well.
Originally Posted by sshort
727 it has mopar performance clutches trans go shift kit d rail pan I had the pressure plate in the forward clutch milled down so i could run 5 discs in it I built it my self about 2 years go It also pulls my toy trailer witch empty weighs 11,400 I would like to install a gear vendors in it some day I also need to install a locker in the rear the 1/4 mile runs were with a open differential when im done it will run high 12,s & still be able to pull my camper Im just rolling off the line with less then 10psi boost so i don't loose traction
 
Reply
Old Jan 26, 2011 | 11:32 PM
  #10  
kingbrad89's Avatar
Diesel Wrench
Joined: Jan 2010
Posts: 500
Likes: 36
From: MEADVILLE PA
Default

Im thinking about makin my 89 a drag truck... seems like it doesnt take much to get em movin pretty good... Anyone know where you can buy 8 lug wheels wide enough for drag radials? Plus, mines non I/C obviously, i think id have to run NOS to keep it cool huh?
 
Reply



All times are GMT -5. The time now is 10:09 AM.