DragSTRIP Video
check this out
|
13.6 not bad at all :c:
|
Nice running and looking truck! :tu:
|
Pretty darn quick! :choochoo:
|
Nice man, how much power are you putting down?
|
:humm:Iam not sure I dynoed it a couple years ago & it was 272hp & torque was like 489? but i have changed a lot since then I am going to try & dyno again this spring if get a chance I also just changed injectors Last time i did not have water/meth or nitrous
|
Cool, well that thing scoots!
What besides a converter have you done to the transmission, how's it holding up? 727 non OD or a518?
Originally Posted by sshort
(Post 694707)
:humm:Iam not sure I dynoed it a couple years ago & it was 272hp & torque was like 489? but i have changed a lot since then I am going to try & dyno again this spring if get a chance I also just changed injectors Last time i did not have water/meth or nitrous
|
727 it has mopar performance clutches trans go shift kit d rail pan I had the pressure plate in the forward clutch milled down so i could run 5 discs in it I built it my self about 2 years go It also pulls my toy trailer witch empty weighs 11,400 I would like to install a gear vendors in it some day I also need to install a locker in the rear the 1/4 mile runs were with a open differential when im done it will run high 12,s & still be able to pull my camper Im just rolling off the line with less then 10psi boost so i don't loose traction
|
Nice to hear the transmission works so well.
Originally Posted by sshort
(Post 694743)
727 it has mopar performance clutches trans go shift kit d rail pan I had the pressure plate in the forward clutch milled down so i could run 5 discs in it I built it my self about 2 years go It also pulls my toy trailer witch empty weighs 11,400 I would like to install a gear vendors in it some day I also need to install a locker in the rear the 1/4 mile runs were with a open differential when im done it will run high 12,s & still be able to pull my camper Im just rolling off the line with less then 10psi boost so i don't loose traction
|
Im thinking about makin my 89 a drag truck... seems like it doesnt take much to get em movin pretty good... Anyone know where you can buy 8 lug wheels wide enough for drag radials? Plus, mines non I/C obviously, i think id have to run NOS to keep it cool huh?
|
All times are GMT -5. The time now is 09:34 AM. |
© 2024 MH Sub I, LLC dba Internet Brands