1st Generation Dodge Cummins 89-93 Discussion of 12 Valve 5.9 Liter Dodge Cummins Diesels with Rotary Injection Pumps

What pump???

Thread Tools
 
Search this Thread
 
  #1  
Old 10-07-2010, 09:51 PM
12valvecory's Avatar
Diesel Enthusiast
Thread Starter
Join Date: Aug 2009
Location: stephenville
Posts: 132
Received 2 Likes on 2 Posts
Default What pump???

So I bought a 2002 half ton with a 1991 cummnis in and it needs the pump changed and I found but the guy said that it won't go on his 91 because the last three numbers are 205 is this true or are they all the same thanks.
 
  #2  
Old 10-08-2010, 02:26 AM
jwirth's Avatar
Diesel Enthusiast
Join Date: Jul 2010
Location: South Carolina
Posts: 313
Received 26 Likes on 21 Posts
Default

Your best bet is call the dodge dealer. Have them check. Dealer connect well have the years that it well fit via the part number.
 
  #3  
Old 10-08-2010, 10:00 AM
Mark Nixon's Avatar
Diesel Enthusiast
Join Date: Jun 2010
Location: Palmyra, Nebraska
Posts: 366
Received 42 Likes on 41 Posts
Default

Is yours intercooled or non-intercooled? 1991 goes either way.
A 205 pump is an intercooled pump.
An intercooled pump won't interchange with a non-intercooled, because the delivery valve assemblies, where the lines attach, are longer on a non-intercooled.

You can interchange the 2 by swapping the line attachements, but be careful you don't lose the parts underneath them in doing so.

Mark.
 
  #4  
Old 10-11-2010, 08:28 PM
12valvecory's Avatar
Diesel Enthusiast
Thread Starter
Join Date: Aug 2009
Location: stephenville
Posts: 132
Received 2 Likes on 2 Posts
Default

so i changed the backs line and huck it all up and bleed all the lines but now i cant get it to start help.
 
  #5  
Old 10-11-2010, 08:34 PM
RSWORDS's Avatar
BOMBARDIER

Join Date: Mar 2007
Location: Gloucester, VA
Posts: 11,159
Received 918 Likes on 537 Posts
Default

got your 12v to the shut off solenoid?
 
  #6  
Old 10-11-2010, 09:27 PM
12valvecory's Avatar
Diesel Enthusiast
Thread Starter
Join Date: Aug 2009
Location: stephenville
Posts: 132
Received 2 Likes on 2 Posts
Default

yes i have the twelve volts im thinking maby its bad the pump had been sitting around for awhile before i installed.
 
  #7  
Old 10-13-2010, 07:47 PM
stillcummin's Avatar
Diesel Enthusiast
Join Date: Apr 2009
Location: Chardon,Oh(cleveland
Posts: 255
Likes: 0
Received 2 Likes on 2 Posts
Default

are you getting fuel to the injectors?
 
  #8  
Old 10-14-2010, 08:32 AM
kieron_kohlmann's Avatar
Diesel Enthusiast
Join Date: Feb 2010
Location: Wisconsin
Posts: 352
Received 31 Likes on 29 Posts
Default

How did you time this pump if you just found it laying around?
 
  #9  
Old 10-14-2010, 10:19 AM
Mark Nixon's Avatar
Diesel Enthusiast
Join Date: Jun 2010
Location: Palmyra, Nebraska
Posts: 366
Received 42 Likes on 41 Posts
Default

VE pumps are keyed, and so is the pump gear.
Assuming the gear wasn't removed from the timing case and the timing wasn't altered, it should run if properly bled of air and the solenoid works.
All he'd have to do is rotate the pump shaft around to match where the keyway is and put it on.

Mark.
 
  #10  
Old 10-14-2010, 10:26 AM
Begle1's Avatar
Diesel Bomber
Join Date: Mar 2007
Location: Capo Beach, CA
Posts: 3,910
Received 335 Likes on 247 Posts
Default

It only goes on one way... Unless you smash the key, then it goes on in several different ways, most of which won't run right.
 


Quick Reply: What pump???



All times are GMT -5. The time now is 04:21 AM.