where are you all getting the dash mount for your gauges??

 

I can't believe I never dropped a pic of my project in this thread!







Next up is a rear shackle-flip, painting the frame, urethane bedliner, changing the 3.54's for a set of 4.10's, radio, windshield and tint, rear flood lights... it really never ends, does it?

 

Updated picture of project/daily driver..

 

just joined up so figured I would post here: 1st gen 1993 W350 4x4 dually auto.

I use it as a light duty toy hauler and she works great.







It had a 6" stack but the stock downpipe was a bit tiny and it was too loud, so I went to a 4" kit all the way out the back.

 

Hey Solder where did you get that NON Chrome grille? I am in the process of Pealing off the chrome and fiber glassing the broken spots on mine, but would like to know where to get one in case mine turns out like POOOO!

 

 

 

50 lb injectors
Holster hx 35 turbo
Timing advance
6" BDS lift
Pump tuned
4" turbo back MBRP exhaust

 

https://www.dieselbombers.com/show-t...250-resto.html

 

Well here is my latest addition to this forum! My 1993 2WD cab stuffed on a 1993 reg cab, 4x4, long bed frame! I installed a rear diff and longer springs from a 2000 2WD frame and with that it lengthened my wheel base about 5 inches! It has a fresh rebuilt 5.9 Cummins with No intercooler and a NV4500 transmission!