anybody have any idea where can locate 14x1.50 -12x1.50 fittin for first gen aftermarket injectors i got? new injectors r 14 n factory r 12mm. and been tryin to figure out how to tweak the fuel pin get lil more out of it?
has a factory turbo off 03 common rail screw on pump turned in 4 down pipe 7 exhaust out right before pass tire 5 sp want some smoke?

 

from ohio lookin to find some info about fuel pin first gen n few other cheap mods ive heard about

 

Hopefully we can get you some answers now!

 

They are doing a drawing on the DennyT stage 2 starting the 12th. Stage 2 would be an upgrade for some smoke and free would be the cheepest thing you could find.

 

How to turn up the ve pump. If you didn't know. Turning up the pre 94 Ram diesel injector pump About the fuel pin, for now turn it so the deepest groove is facing the front of the truck. You can also upgrade the air filter to a BHAF.

BHAF part numbers (these are all paper filters):

John Deere PMAH19037
Carquest 87790
Hastings AF1012
Donaldson B105006
Baldwin PA2820
Wix 42790
Napa 2790
Fleetguard AH19037

Or make your own filter setup. 1stGen.org • View topic - Homemade intake Also make sure you have gauges.