Diesel Bombers
Page 4 of 4
« First
2
3
4
Show 40 post(s) from this thread on one page

Diesel Bombers (https://www.dieselbombers.com/)
-   1st Generation Dodge Cummins 89-93 (https://www.dieselbombers.com/1st-generation-dodge-cummins-89-93/)
-   -   speedometer problems (https://www.dieselbombers.com/1st-generation-dodge-cummins-89-93/45700-speedometer-problems.html)

NadirPoint 03-24-2010 07:46 PM
Originally Posted by markp (Post 523258)
I just put a Cummins 1st. gen in my Ford. Anybody ever try to put a cable on the Getrag and hook it to the Ford speedo?? Will this work?? I found a speedo shop that can make a cable with Ford top,,, Getrag bottom.
Should work just fine, as long as you put in the correct ratio adapter. You'll need 2 cables: One from the trans to the RA, and then another one connecting the RA to the speedo. Exactly what RA you may need will take some guessing and experimentation, depending on tire size, etc.

I suppose it's not outside the realm of possibility you can just hook it up with one cable and it will be close enough. :humm:

pmcwaters 03-30-2010 03:03 PM
my speedometer is not working at all nor is the cruise control. Looks like a vacum powered cruise control as there are lines from the vacumn assist on MC. The fuse is a 2 amp and it looks good. The VSS looks good but the nut was loose which I tightened.

any ideas?

pmcw@att.net :scare2:

Dodge D250 2wd 1991 diesel with cummins turbo


All times are GMT -5. The time now is 05:10 AM.
Page 4 of 4
« First
2
3
4
Show 40 post(s) from this thread on one page


© 2024 MH Sub I, LLC dba Internet Brands