well if I take and block the wastegate off or put a boost elbow on it then I will probably run into a little more heat correct?

 

bump

 

no, by doing that you will be putting more air into teh engine and that "should" cool it off. I would not block teh WG, I would do a Boost Elbow, then you can tune it and keep it in its map.

 

Alright, I'll have to look into the elbow then.

 

contact jkidd on here. he was the only one who could get me one.

 

OK, talked to my brother today (he went and picked it up for me and has it at his house currently) the wastegate actuator is MIA. Where could I get one of these from and is it going to cost me an arm and a leg?

 

I have a weldable HE351 flange and adapter the other side can adapt it to an hx40 style clamp.


picture of the HE351 flange adapter--- either weld it to a 4" downpipe or clamp it to an hx40 flange.


silicone tube for compressor outlet to intercooler (must clock turbo and make bracket for wastegate.


pictures hooked up to a 2nd gen hx40 clamp and hx40 downpipe

 

ummm... thanks. But I was looking for a wastegate actuator for an HY35.

 

i have one for you.

 

You have one for an HY35? How much you want for it?