Anybody got a 1st gen sittin around? I need a part bad
#1
Anybody got a 1st gen sittin around? I need a part bad
One of the plastic ball connectors on my throttle linkage broke. I super glued it back together and for right now I can get the mile or two to work but its a very temporary fix. The part I need is the black plastic thing that clips on the ball on the linkage from the Go pedal. There is a metal rod between there and the IP with a similar looking piece connected to the linkage on the IP but the threads are reversed.
#3
#4
The following users liked this post:
jasonfriedlin (12-31-2009)
#5
In was just reading on the other forum, I never go there by the way, that there was a recall on these and Geno's has the part numbers.
Throttle Rod Photos
Throttle Rod Photos
#6
The following users liked this post:
jasonfriedlin (12-31-2009)
#7
#8
when mine broke, i took the metal ball of the end, and used some metal wire and threw it through the holes. it worked well for a temporary fix until you fix yours
#10