Anybody got a 1st gen sittin around? I need a part bad
 

One of the plastic ball connectors on my throttle linkage broke. I super glued it back together and for right now I can get the mile or two to work but its a very temporary fix. The part I need is the black plastic thing that clips on the ball on the linkage from the Go pedal. There is a metal rod between there and the IP with a similar looking piece connected to the linkage on the IP but the threads are reversed.

just remove the ball and throw a bolt in there

Ive gotta be able to connect the bolt to that rod somehow

go tot he sticky on the main page. i had to same problem and dodge doesnt sell that part anymore. you can get all the parts from mcmastercarr to build a new one for like 13 bucks. theyre impossible to find too no one will sell them

In was just reading on the other forum, I never go there by the way, that there was a recall on these and Geno's has the part numbers.

Throttle Rod Photos

my dad jus ordered the whole thing from cummins for my truck or you can order the metal ends they work on these trucks too hopefully this helps

Yeah Im gonna get it from Cummins, next week when they open I guess. Luckily I dont have to drive much, Im not sure how long my super glue is gonna last

when mine broke, i took the metal ball of the end, and used some metal wire and threw it through the holes. it worked well for a temporary fix until you fix yours

Is this why you had issues Jason? Or did you do this trying to get your issues straight?

Tryin to get my issues straight