No spedometer or wait to start light in 91 cummins
#11
#12
mine had a ground wire from the - side right to the frame like 6 in of wire when i first bought the truck it had not been started in over a year i opened the hood and saw that and said look at this hillbilly **** and riped it off the owner had lost the keys so i hot wired the pump and the starter then drove it home where i started it this way for about a month then put in an aftermarket ignition switch and then found out that the headlights were dim the gauge light were dim and it wouldn't start or run anyhoot i chased my tail on this for 4-5 days and finally figured it out i cant explain why but it works and has for the last 2 years i owned it
#13
91 Dodge Cummins Speedometer
I recently changed standard Transmissions on my 91 Dodge 1 ton diesel truck.
It now has a 1995 NV4500.
The old trans had a 2 wire Speedometer Sensor the new one 3 wires.
I bought an aftermarket Speedometer that can use either.
I bought a VSS103 and a SC105 sender that fit but have no wiring diagram.
I do not even know if it has to go thru an ECM to work.
How do I get one of my Speedometers to work?
It now has a 1995 NV4500.
The old trans had a 2 wire Speedometer Sensor the new one 3 wires.
I bought an aftermarket Speedometer that can use either.
I bought a VSS103 and a SC105 sender that fit but have no wiring diagram.
I do not even know if it has to go thru an ECM to work.
How do I get one of my Speedometers to work?
Thread
Thread Starter
Forum
Replies
Last Post
mcclusk
24 Valve 2nd Gen Dodge Cummins 98.5-02
3
02-21-2015 09:50 PM
bullrideris1
24 Valve 2nd Gen Dodge Cummins 98.5-02
0
01-23-2015 09:22 AM