Would 90 hp injectors be to much for a ve bosch pump?Ive already put the 3200 gov spring in turned in the smoke screw and turned the fuel pin in.Also have AFE intake and 4 inch straight pipe.

 

Nope they will be fine. You might want to consider replacing the stock lift pump if you seriously turn up the Injection pump though.

 

VE pumps need larger injectors to deliver the same quantity of fuel as a P-pump (or VP pump or common rail) because VE's run lower injection pressures. Lower pressures mean that you need a larger hole to push the same quantity of fuel through.

That's why injectors like 435's (5x.014) can make 600 HP on a P-pump (possible, right?) and 400 HP on a VE pump.

Whatever injectors you get, make sure that they are injectors for the VE pump; P-pump injectors fit in the bores, but the lines won't thread on and the pop pressures will be wrong.

 

well begle what size would the 90hp injectors be..
if 435 are 5x14s
90 would be what. 5x16? 5x18? bigger . smaller?

 

Ok that sounds like a plan,thanks for the advice.SO I should go with a airdog or a fass system probably?

 

no probably about it bud you can never go wrong with fuel system upgrades