1st Generation Dodge Cummins 89-93 Discussion of 12 Valve 5.9 Liter Dodge Cummins Diesels with Rotary Injection Pumps

My tranny

Thread Tools
 
Search this Thread
 
  #1  
Old 05-05-2009, 09:17 PM
Bad93Cummins's Avatar
Diesel Wrench
Thread Starter
Join Date: Apr 2009
Posts: 719
Received 5 Likes on 5 Posts
Default My tranny

I replaced the tranny line's to the 2nd cooler in front of driver's side tire with hyd. hose(heavier duty) cause the other's where leaking. My tranny tho seems to come in and out of OD alot mostly when cold, sometime's seems like it stay's in 3rd for longer then it should and will sometime's just come out of OD and go into 3rd, is my tranny going? Fluid's good.
 
  #2  
Old 05-05-2009, 10:59 PM
peobryant's Avatar
Diesel Enthusiast
Join Date: Apr 2009
Location: Goshen, Ky
Posts: 176
Likes: 0
Received 7 Likes on 5 Posts
Default

Have you tried adjusting the TPS?
 
  #3  
Old 05-06-2009, 06:17 AM
RSWORDS's Avatar
BOMBARDIER

Join Date: Mar 2007
Location: Gloucester, VA
Posts: 11,159
Received 918 Likes on 537 Posts
Default

When it warms up is it fine? I'm pretty sure the tranny looks out OD until the engine warms up to a certian point to aid in warming up the engine. Temp sender dirty/faulty?
 
  #4  
Old 05-06-2009, 06:40 AM
Bad93Cummins's Avatar
Diesel Wrench
Thread Starter
Join Date: Apr 2009
Posts: 719
Received 5 Likes on 5 Posts
Default

Originally Posted by '91 Cummins
Have you tried adjusting the TPS?
New to these trucks and pretty new to diesel's, so don't know what a TPS is?

---AutoMerged DoublePost---

Originally Posted by RSWORDS
When it warms up is it fine? I'm pretty sure the tranny looks out OD until the engine warms up to a certian point to aid in warming up the engine. Temp sender dirty/faulty?
It does seem like when its warm it shifts fine, every now and than it will do it not very often when warm.
 

Last edited by Bad93Cummins; 05-06-2009 at 06:40 AM. Reason: Automerged Doublepost
  #5  
Old 05-06-2009, 07:20 AM
RSWORDS's Avatar
BOMBARDIER

Join Date: Mar 2007
Location: Gloucester, VA
Posts: 11,159
Received 918 Likes on 537 Posts
  #6  
Old 05-06-2009, 03:58 PM
MegaMan's Avatar
Diesel Enthusiast
Join Date: Aug 2008
Location: Biloxi, MS
Posts: 109
Received 4 Likes on 4 Posts
Default

This is probably a dumb question but did you make sure you topped off the fluid after changing the hoses? Also, is it possible you could've gotten an air pocket in the system during the swap? Might just take a little driving to work it out.
 
  #7  
Old 05-06-2009, 08:02 PM
Bad93Cummins's Avatar
Diesel Wrench
Thread Starter
Join Date: Apr 2009
Posts: 719
Received 5 Likes on 5 Posts
Default

Yes sir, it fluid is between the s and a of the safe mark.
 
  #8  
Old 05-06-2009, 08:39 PM
RSWORDS's Avatar
BOMBARDIER

Join Date: Mar 2007
Location: Gloucester, VA
Posts: 11,159
Received 918 Likes on 537 Posts
Default

Did you try the TPS adjustment yet?
 
  #9  
Old 05-06-2009, 08:44 PM
FastCR's Avatar
Diesel Bomber
Join Date: Aug 2007
Location: Livingston Montana
Posts: 1,525
Received 79 Likes on 66 Posts
Default

Originally Posted by MegaMan
This is probably a dumb question but did you make sure you topped off the fluid after changing the hoses? Also, is it possible you could've gotten an air pocket in the system during the swap? Might just take a little driving to work it out.
x2
the only 1st gen experience i have is parting one out, but that hydraulic hose is thicker, is the inner diameter the same?

just a thought...
 
  #10  
Old 05-07-2009, 06:30 AM
Bad93Cummins's Avatar
Diesel Wrench
Thread Starter
Join Date: Apr 2009
Posts: 719
Received 5 Likes on 5 Posts
Default

Originally Posted by RSWORDS
Did you try the TPS adjustment yet?
No not yet, today I will as I finally have a day off today.

---AutoMerged DoublePost---

Originally Posted by FastCR
x2
the only 1st gen experience i have is parting one out, but that hydraulic hose is thicker, is the inner diameter the same?

just a thought...
Yes sir it is.
 

Last edited by Bad93Cummins; 05-07-2009 at 06:30 AM. Reason: Automerged Doublepost


Quick Reply: My tranny



All times are GMT -5. The time now is 04:30 PM.