not shifting right
#1
not shifting right
since i had my tranny rebuilt it has not shifted right from 2nd to 3rd. if i am running it hard it never seems to want to shift. if i let out of the throttle it will shift fine or if i just drive responsible... ha right. also if i let out and coast for more than a few seconds it will down shift out of overdrive. it did that before i had the tranny rebuilt too. i didnt know if there were any adjustment and if there are what are the suppose to be set at.
#5
Is your kick down linkage set right?It doesn't sound like a linkage problem,but I would check it out anyway.On my truck the kickdown cable is mounted to the throttle bracket,and there is a locking clip that lets you slide the cable to the right position.It was touchy on my truck to get it to shift like I wanted.Factory setting for mine is .225 inch from the back of the slot pin to the back of the slot,but I ended up with .26 to make it shift sooner due to pump mods.Probably a thread somewhere pertaining to your truck.
#6
#10