HX52 turbo
#1
HX52 turbo
I just read in this month's diesel power magazine about them putting a hx52 turbo on a first gen cummins and they said it made 55psi of boost and 430 hp. I have never even heard of these turbos since now. What were they used on? They also said it has the exhaust flange adapter. where would I get one of those? I would really like to get one of these eventually
#2
The following users liked this post:
84chummins (07-05-2013)
#3
Ya I dont even think the 8.3L cummins had that big of a turbo, with a turbo turbo that big, your going to either have some major lag, or it aint gonna be do much unless your pushing some serious fuel. The turbo alone wont at 300 horse on a first gen, you got to have some beefed up injectors and injection lines.
The following users liked this post:
84chummins (07-05-2013)
#4
#5
#6
i dont remember the exact specs but im very confident the thing is a 67/??/16 the turbine is in the 70's. the m11 cummins comes with a hx55. im also not sure what the 52 came on but i have seen them work and they can work decent. it will be laggy, there are much better choices out there but a used fleet turbo often times can be had for cheap.
#8
I once found a list on Google with the engines Holsets are fitted to. like a dummy I did not add it to favourites. Still trying to find it again, found one from Spain that lists some of them.
Try Google-Holset hX52, 2 siteson there have reasonable info, Turboforums and turboblogspot.
Seems this came of a Volvo, has various turbine housings, saw 16 cm and 19 cm listed.
Try Google-Holset hX52, 2 siteson there have reasonable info, Turboforums and turboblogspot.
Seems this came of a Volvo, has various turbine housings, saw 16 cm and 19 cm listed.
Last edited by blackduck; 07-05-2013 at 09:51 PM. Reason: update
#9
Thread
Thread Starter
Forum
Replies
Last Post
avatardvr
Ford Powerstroke 03-07 6.0L
18
08-08-2019 12:38 AM
jrsavoie
Chevy/GMC 6.2L and 6.5L
1
02-06-2015 09:44 PM
tumble72
Ford 83-94 6.9 and 7.3L General
8
11-27-2014 10:31 PM