5x.014 injectors.... Turbo?
#11
11-27-2012, 11:21 AM
Diesel Enthusiast
X2
---AutoMerged DoublePost---
Just make sure you get a big enough turbo and increase your air flow to lower your EGT's with those 7x.014's you'll be in for a hot exhaust for sure.
---AutoMerged DoublePost---
Just make sure you get a big enough turbo and increase your air flow to lower your EGT's with those 7x.014's you'll be in for a hot exhaust for sure.
Last edited by bladeyamaha; 11-27-2012 at 11:21 AM. Reason: Automerged Doublepost
#12
11-29-2012, 11:08 AM
Diesel Enthusiast
On a budget? Get a 16cm housing w/60mm wheel, POD Injectors, Home made cold air intake, and turn your pump up; 3200 spring, grind your fuel pin, adjust your star wheel.... then watch out!
---AutoMerged DoublePost---
Oh, don't forget, make up a DIY propane injection kit. I just did a writeup over on the Cummins forum....
---AutoMerged DoublePost---
Oh, don't forget, make up a DIY propane injection kit. I just did a writeup over on the Cummins forum....
Last edited by Screamin' Metal; 11-29-2012 at 11:08 AM. Reason: Automerged Doublepost
Thread
Thread Starter
Forum
Replies
Last Post
jkidd
Diesel Auto Power
0
07-03-2015 06:05 PM
Whitereaper12v
12 Valve 2nd Gen Dodge Cummins 94-98
13
01-25-2015 07:05 PM
tumble72
Ford 83-94 6.9 and 7.3L General
8
11-27-2014 10:31 PM
strokin97
Ford Powerstroke 94-98 7.3L
4
09-30-2014 11:59 PM
