3200 gov spring installed truck wont run!
#1
3200 gov spring installed truck wont run!
Okay installed my new gov spring today and now the truck won't run I tryed priming the pump before starting nothing.tryed holding the peddle to the floor nothing I'm sure I have it indexed right any help or tips ? I left my full power screw the same could this be the problem?
#2
No, prolly not, crack a line at one or two of the injectors and turn it over, Once you get fuel there to at least one, two would be better, then retighten the injector lines, it may fire right up then, if that's not the problem, you may have installed improperly, I have not installed one yet but you can try my suggestions easily enough with no real losses. Hope it works. Have a better day man, I hope!
#4
#5
i did mine same problem.i watched video on utube and it said when you take fuel pin out look in bore and actuate throttle lever if pin does not move there is problem.this is my problem my pin not moveing i am working on this right now,.can anyone help.why pin not moveing?
---AutoMerged DoublePost---
utube video (bd gov spring)
---AutoMerged DoublePost---
utube video (bd gov spring)
Last edited by willyslick; 10-09-2012 at 09:41 AM. Reason: Automerged Doublepost
#6
#10