Im in the process of my cummins build and destroke project, i don't know what injectors yet but getting big ones, running colt stage 4 cam, head studs, ve pump cranked with fuel pin( my p7100 will go in eventually) and am wanting the bd super b special. Was looking at aurora also but they arnt waste gated. My buddy has the super b but I want something ream loud like hx35 with no s ring I wanna stay under 1800 bucks, anyone got any ideas?

 

I like the *148 injectors the 7 x .010's

---AutoMerged DoublePost---

Those are the injectors I'm getting BTW.

 

What power are those good up to my goal is 500 horse when I'm done atleast, what injectors should I run, keep in mind ill probably be running bd super b special unless I can find a louder one Haha love turbo spool thanks

 

I'll have to call and ask. You can find more and call at www.DieselAutoPower.com Not all their stuff is updated on their website.

 

So what do you all recommend for injectors good to 500 horse and turbo similar to bd super b special just loud as can be

 

Call Jacob there, he'll have a great idea I'm sure of it.

 

I was reason up on someones build and they ran a 63/65/14 turbo with 6x16 injectors said it was good set up but little hot, im doing colt stage 4 cam method injection andgasket match to polish on head so egts will be pretty low. I tow my wheeler and gear across attention from time to time with everything probably extra 10kk im pulling easy, are these injectors gunna be to much fuel for towing from time to time

---AutoMerged DoublePost---

I mean more like 8-8500 pounds

---AutoMerged DoublePost---

Or should I do 5x16s . My goal is just 500 horse power. Will either of these haze at idle? And what does the spray angle mean?

 

i run ddp stage 3 injectors lots of power but haze on idle quite a bit until the engine is warmed up. i love my 62/65/14 phatshaft runs great and is quite loud when spooled

 

What size are they I just want to know what would be better 5x16s or 6x16s for running big stick cam and bd super b special turbo. Im going for 500 horse but I tow sometimes don't want that hot of egts but the cam polished head will drop it alot and a good place to buy frommmm

 

5x.014 or 7x.012 will be a good match for a super B special