turbo
#1
turbo
Im in the process of my cummins build and destroke project, i don't know what injectors yet but getting big ones, running colt stage 4 cam, head studs, ve pump cranked with fuel pin( my p7100 will go in eventually) and am wanting the bd super b special. Was looking at aurora also but they arnt waste gated. My buddy has the super b but I want something ream loud like hx35 with no s ring I wanna stay under 1800 bucks, anyone got any ideas?
#2
#3
#7
I was reason up on someones build and they ran a 63/65/14 turbo with 6x16 injectors said it was good set up but little hot, im doing colt stage 4 cam method injection andgasket match to polish on head so egts will be pretty low. I tow my wheeler and gear across attention from time to time with everything probably extra 10kk im pulling easy, are these injectors gunna be to much fuel for towing from time to time
---AutoMerged DoublePost---
I mean more like 8-8500 pounds
---AutoMerged DoublePost---
Or should I do 5x16s . My goal is just 500 horse power. Will either of these haze at idle? And what does the spray angle mean?
---AutoMerged DoublePost---
I mean more like 8-8500 pounds
---AutoMerged DoublePost---
Or should I do 5x16s . My goal is just 500 horse power. Will either of these haze at idle? And what does the spray angle mean?
Last edited by codycatract; 09-19-2012 at 06:03 PM. Reason: Automerged Doublepost
#9
Thread
Thread Starter
Forum
Replies
Last Post
avatardvr
Ford Powerstroke 03-07 6.0L
18
08-08-2019 12:38 AM
jrsavoie
Chevy/GMC 6.2L and 6.5L
1
02-06-2015 09:44 PM
tumble72
Ford 83-94 6.9 and 7.3L General
8
11-27-2014 10:31 PM